3
be outside of the auto-assignment range given in the dialog), but the addresses for all nodes must
be in the subnet.
Gateway: The IP Address of the device that connects two (sub)networks that use different
communications protocols, enabling them to communicate with each other. The value defined here
propagates to PNCs and I/O devices throughout the network.
If the gateway is improperly set, devices may be unable to communicate on the
network and might disrupt network communications. Contact your network
administrator to assign values that work with an existing network.
IO-Controllers: (Read-only.) The number of I/O Controllers configured to reside on the LAN.
IO-Devices: (Read-only.) The number of I/O devices configured to reside on the LAN.
PACSystems* RX3i PROFINET Controller Manual – December 2011
3-12
Caution
GFK-2571A