GE IC695PNC001 User Manual page 53

3
PROFINET Scanner Parameters (Media Redundancy Tab)
By default, the PNS is not set up for Media Redundancy. If the system will use Media Redundancy
(see chapter 6 for more information), open the Media Redundancy Tab and select Client.
If the PNS will be a Media Redundancy Client, click on Ring Port 1 and Ring Port 2 to choose the
module ports that will be used.
PROFINET Scanner Parameters (Module Parameters Tab)
The PNS has one module parameter:
By default, the PNS module LEDs will blink a fault code if a fatal error occurs. This can be changed
to cause the PNS to restart instead.
GFK-2571A Chapter 3 Configuration 3-15