6.4.5
Setup via Web Inter-
face over USB
GR10/GR25, Equipment Setup
Setup via Web Interface over USB
6
GR10_023
Step
Description
1.
Turn on the instrument.
2.
Start the computer.
3.
Loosen the screw on the SD card/USB port cover.
4.
Open the SD card/USB port cover.
5.
Plug the USB cable into the USB port on the instrument.
6.
Plug the USB cable into the USB port of the computer.
7.
Open a browser and type in the IP address: 192.168.254.2 to access the
instruments Web interface.
8.
Use the default User name (Admin) and Password (12345678).
After logging in the first time you must create a new user account,
including a new user name and password. The default user account
can then be deleted. Refer to the GR Series Operational Manual
(Online Help) for a step-by-step guide.
9.
Configure the instrument for all required settings.
5
1
57