Install Usb Drivers; General; Setup Via Web Interface Over Usb - Leica GM30 User Manual

6.4
6.4.1
Before you begin
6.4.2
Setup via web
interface over USB
GR30/GM30/GR50, Equipment Setup

Install USB drivers

General

Before connecting the instrument to a computer using a USB cable, you must first
install USB drivers. To install the USB drivers refer to the GR/GM USB Driver Installation
Guide available on myWorld.

Only one instrument can be connected to the computer via USB at a time.

Setup via Web Interface over USB

6
GR10_023
Step Description
1. Turn on the instrument.
2. Start the computer.
3. Loosen the screw on the SD card/USB port cover.
4. Open the SD card/USB port cover.
5. Plug the USB cable into the USB port on the instrument.
6. Plug the USB cable into the USB port of the computer.
7. Open a browser and type in the IP address: 192.168.254.2 to access the
instruments web interface.
8. Use the default User name (Admin) and Password (12345678).

After logging in the first time you must create a new user account,
including a new user name and password. The default user account
can then be deleted. Refer to the "GR/GM Series Operational Manual
(Online Help)" for a step-by-step guide.
9. Configure the instrument for all required settings.
5
1
49