Install Usb Drivers For Windows Vista Operating Systems - Leica GR10 User Manual

6.4.3
Install USB drivers
for Windows Vista
for the first time
GR10/GR25, Equipment Setup

Install USB drivers for Windows Vista operating systems

9
23
GR10_007a
Step Description
1. Turn on the instrument.
2. Start the computer.
3. Disable the User Account Control before installing the drivers.
Go to Start Control Panel  User Accounts and Family Safety (or
4.
User Accounts, if you are connected to a network domain) User
Accounts.
5. Select Turn User Account Control on or off.

Enter the computer administrators password if prompted.
6. Disable the check box, Use User Account Control (UAC)to help protect
your computer.
7. Click OK.
8. Restart the computer for all changes to take effect.
9. Insert the Leica GR Series DVD.
10. Run the installer executable depending on your CPU and operating system
to install the drivers necessary for your instrument.
a) 32 bit CPU: SetupViva&GR_USB_32bit.exe
b) 64 bit CPU: SetupViva&GR_USB_64bit.exe
c) Itanium 64 bit CPU: SetupViva&GR_USB_64bit_itanium.exe
11. Wait until the Mobile Device Center Driver Update is finished.
12. The Welcome to InstallShield Wizard for Leica Viva & GR USB drivers
window appears.
13. Click Next>.
14. The Ready to Install the Program window appears.
15. Click Install. The drivers are installed on your computer.
16. Click Install this driver software anyway every time a window pops up
saying that the software has not passed the Windows Logo testing.
17. The InstallShield Wizard Completed window appears.
18. Read the instructions and check the box, I have read the instructions.
These instructions are listed in detail in the following steps.
19. Click Finish to exit the wizard.
20. Loosen the screw on the SD card/USB port cover.
21. Open the SD card/USB port cover.
22. Plug the USB cable into the USB port on the instrument.
1
22
53