Leica GR10 User Manual page 38

Button combina-
tions
GR10/GR25, GR10 User Interface
Buttons How to
+ Activate dual button functionality
Press and hold both buttons until all LEDs are flashing. After
1 s, the
The following instrument commands are now activated.
Start/Stop all logging sessions
Activate the dual button functionality.
If all logging sessions had been off, the Raw data logging LED
is flashing green.
3 s • Press the Function button until the LED flashes quickly to
OR
If any logging session had been active, the Raw data logging
LED is flashing red.
• Press the Function button until the LED flashes quickly to
After logging has been started or stopped, the LED and instru-
ment functionality goes back to general behaviour.
Start/Stop all data streams
Activate the dual button functionality.
1 X
Press the Function button until the
starts flashing slowly.
If all data streams had been off, the RT out data stream LED is
flashing green.
3 s • Press the Function button until the LED flashes quickly to
If any data stream had been active, the RT out data stream LED
is flashing red.
OR
• Press the Function button until the LED flashes quickly to
After data streams have been started or stopped, the LED and
instrument functionality goes back to general behaviour.
Initialise the measurement engine
Activate the dual button functionality.
2 X
Press the Function button until the
flashing slowly.
3 s • Press the Function button until the LED flashes quickly to
After the measurement engine has been initialised, the LED
and instrument functionality goes back to general behaviour.
Raw data logging LED starts flashing.
START all configured logging sessions if the Raw data
logging LED is flashing green.
STOP all active logging sessions if the Raw data logging LED
is flashing red.
START all configured data streams if the RT out data steam
LED is flashing green.
STOP all active data streams if the RT out data stream LED
is flashing red.
reset the measurement engine. This action will delete all
almanac and ephemeris information and the instrument will
take a few minutes to restart tracking satellites.
RT out data streams LED
Position LED starts
38