Leica GR10 User Manual page 77

Data output
USB client port
USB host port
External oscillator
Ethernet network
interface
Bluetooth
WLAN
GR10/GR25, Technical Data
• Raw Data
• Almanac
• Ephemeris
• Position data
Support:
Speed:
GR25 only:
Support:
Speed:
Output power:
All receivers
Frequency:
Input impedance:
Input VSWR:
Signal level:
Frequency stability:
Wave shape:
Connector:

On the GR10/GR25, remove the External oscillator port cover before
connecting the cable.

Internal Oscillator aligned to GPS time within 10 ns.
All receivers
IEEE Standards:
Link Speed:
Protocol:
Connector:
Type:
Enhanced Data Rate:
Connector:
Type (single stream):
Network authentication: Open, Shared, WPA-PSK (no server), WPA-NONE, WPA,
Encryption type:
Connector:
USB 2.0
Full speed, 12 Mbit/s (1,5 MB/s)
USB 2.0
High speed, 480 Mbit/s (60 MB/s)
500 mA (5 V) => Support devices up to 2.5 W
5 MHz or 10 MHz
50 nominal
2:1 maximum
0 dBm minimum to +13.0 dBm maximum
+0.5 ppm maximum
Sinusoidal
MMCX female - 24QMA-50-2-3/133
802.3 10BASE-T Ethernet
802.3u 100BASE-TX Fast Ethernet
802.3 Auto-negotiation
10/100 MB, Half/Full Duplex
CSMA/CD
Ruggedised RJ45
Bluetooth 2.0
EDR maximum 2.1 Mbits/s
SMA male
IEEE 802.11 bg and n
WPA2, WPA2-PSK (no server)
Disabled, WEP, TKIP, AES
SMA male
77