Leica GR10 User Manual page 56

GR10/GR25, Equipment Setup
Step Description
23. Plug the USB cable into the USB port of the computer.

Windows will show searching for IP address. Ignore this and go to
the next step.
24. Run shortcut Configure GR connection which has been configured on the
Windows desktop.

There are two more shortcuts created for the Leica GS and CS. These
shortcuts can be ignored, unless these devices are needed on this
computer. Refer to the GS or CS User Manual for further informa-
tion.
25. A DOS window is opened and a batch file is started to configure the IP
settings for the RNDIS network adapter.
26. Press any key to close the DOS window.
27. Disconnect and reconnect the USB cable.
28. Open a browser and type in the IP address: 192.168.254.2 to access the
instruments Web interface.
29. Use the default User name (Admin) and Password (12345678).

After logging in the first time you must create a new user account,
including a new user name and password. The default user account
can then be deleted. Refer to the GR Series Operational Manual
(Online Help) for a step-by-step guide.
30. Configure the instrument for all required settings.

Please make sure that JavaScript is allowed to run on the web browser.
Check the browser settings if you have problems using the Web interface.
56