Lennox CLIMATIC 60 User Manual page 42

COMMUNICATION
5. Use the "↓", "↑" keys to select the desired address of CLIMATIC™ 60. CLIMATIC™ 60 address must be at the address "1" except
if there is several units linked. The next screen is displayed.
6. Press the "←" key to go to the next step.
7. The following screen describes the used connection type. Set the display as a Private "Pr" terminal. The other terminals (Trm2 and
Trm3) are not used. So their addresses must be adjusted to "None". Finally confi rm the modifi cations, swapp the text "No" to "Yes"
and validate with the"←" key.
Display address
After a star up, the fi rst screen contains the main information about the CLIMATIC™ 60's software.
• 40 •
Display address
changed
Terminal confi g
Press ENTER
to continue
P01: Adr Priv / shared
Trm1 31 Pr
Trm2 None --
Trm3 None -- OK?
No
-LENNOX-
Language | CH 060 STD
-English |
| Vers: 01.0
| Rev: 00.0
| Boot: 4.05
| Bios: 5.09
Private display
CL60-AC CHILLER-IOM-1011-E