Lennox CLIMATIC 60 User Manual page 13

COMPONENTS
External current 4/20mA signal
In this case the actual set point is calculated according to the analog input current. The set points specify the corresponding set point
for 4mA and for 20mA.
Cooling set point (°C)
Second external set point
In this case the actual set point is specifed by one of the two set points. The fi nal set point depends on the status of the digital dry
contact allocated to this function.
Cooling set point (°C)
Open
External current 4/20 mA offset
In this case the set point is set by one of the previous solution and can be adjusted with an offset of +/- 1.0°C.
Cooling set point (°C)
Actual set point
CL60-AC CHILLER-IOM-1011-E
Current input signal
4/20 mA
Closed
Digital input contact
Current inpu signal
4/20 mA
Heating set point (°C)
Heating set point (°C)
Open
Heating set point (°C)
Actual set point
Current input signal
4/20 mA
Closed
Outside air
temperature (°C)
Current inpu signal
4/20 mA
• 11 •