Lennox CLIMATIC 60 User Manual page 17

COMPONENTS
Terminal DC60:
The changeover mode (cool / heat) can be modifi ed by the terminal DC60 by pressing the "mode" button.
Heat →
When the "Auto" mode is selected, the icon "Cool" or "Heat" is displayed to signal the actual operating mode. Due to communication
delay, after pressing the "mode" button it is advised to wait few seconds, the time to refresh of the icon on the display.
Settings
The different settings to adjust the changeover mode are available in the menu:
• (2224) or (3224): changeover mode (Cool, Heat, Auto, Dead zone) for each schedule mode (Night, Day, Day A, Day B, and BMS).
• (2225) or (3225): minimum outside temperature to swap to heating mode. (only if (2224) or (3224)="Auto").
• (2226) or (3226): maximum outside temperature to swap to cooling mode. (only if (2224) or (3224)="Auto").
CL60-AC CHILLER-IOM-1011-E
Cool → Auto → Dead zone
• 15 •