Lennox CLIMATIC 60 User Manual page 40

COMMUNICATION
Night mode,
The DC60 terminal also displays the status of the main component of the unit in the status area. The icons can take different appearance
according to the status of the component.
Settings
The CLIMATIC™ 60 offers possibilities of override operations.
On/Off
When the "power" button is pressed during few seconds, the unit is ordered to start or stop. When the unit is "OFF", the clock is displayed.
Changeover mode
The changeover mode (cool / heat) can be modifi ed through the DC60 terminal by pressing the "mode" button.
When the "Auto" mode is selected, the icon "Cool" or "Heat" is displayed to signal the actual operating mode of the unit. Due to
communication delay, after pressing the "mode" button, it is well advised to wait few seconds, the time to refresh of th icon on the display.
Clock: there is two way to modify the clock hour:
• Press the "clock" button during few seconds. When the hour is blinking, turn the wheel button to select the desired hour and validate
by pressing the wheel button. Once the hour is validated, repeat the procedure for the minute and the weekday.
• Press the "On/off" and "Fan" buttons simultaneously during few seconds. When the terminal displays "CODE", select the password
"22" and validate by pressing the wheel button. Then select the item to modify ("year" → Year, "mont → Month, "nday" → day of
the month, "uday" → weekday, "hour" → Hour, "mins" →Minute).
• 38 •
Day mode,
General alarm
Evaporator pump(s)
Heat →
Day A mode, Day B mode,
Defrost
Compressors
Pump OFF (icons hidden)
Pump ON (icons visible)
Pump alarm (icons blinking)
Cool →
GTC mode
Auto
CL60-AC CHILLER-IOM-1011-E