Techkon SpectroDrive Manual page 8

Dimensions
95 mm
52:
74:
102: 1250 mm
105: 1280 mm
Two different performance packages
The scan-measurement device SpectroDrive and the Microsoft Windows software
ExPresso form a complete quality control system for increasing productivity and qual-
ity of a printing press.
There are two different versions available:
SpectroDrive + ExPresso Basic
consists of the spectral measuring device
SpectroDrive and the Microsoft Windows
software ExPresso Basic with the follow-
ing functions:
• Ink zone specific density display
• Color density for CMYK and spot
colors (spectral density)
• Densitometric gray balance
• Dot area, dot gain and printing contrast
• Slur/doubling value
• Target values, references, tolerances,
OK-sheet
• Front- and reverse-printing
• Works with any color bar length
• Display of single measurements when
used as a hand-held device
• Measurement data export (e.g. JDF-format)
• Statistical analysis and report generator
• Supports up to 6 printing units
Page 8
750 mm
970 mm
Manual TECHKON SpectroDrive Chapter 1 – General description
Formats:
52: for printed sheet 00 (B3+, 370 x 520 mm)
74: for printed sheet 0B (B2+, 520 x 740 mm)
102: for printed sheet 3B (B1+, 720 x 1020 mm)
105: for printed sheet 3B+ (B1+, 780 x 1050 mm)
Special formats (up to 2100 mm system length/
1800 mm scan length) on request
SpectroDrive + ExPresso Pro
contains the same functions as the Basic
package and additionally:
• Ink zone specific colorimetric ∆E*a*b*-
display, CIE L*a*b*, ∆L*a*b*, L*C*h*,
∆L*C*h*
• "InkCheck" recommendation for ink
key setting
• Display and evaluation according to
ISO 12647, Gracol G7™
• Supports up to 16 printing units
A post-purchase software-upgrade from
the Basic- to the Pro-version can be
done easily.