Techkon SpectroDrive Manual page 26

The following settings can be made in the "Printing conditions" section:
Printing conditions – Presses
• Name:
• Manufacturer:
• Type:
• Number of printing units:
• Number of ink zones:
• Ink zone width:
• Reversing after
printing unit:
You can set up new printing presses (see p. 24) and edit or delete the ones which are
already defined and listed in the right section of the "Presses" window.
Tip: By double clicking on one of the printing presses which are listed in the right
section of the main window you switch directly into the appropriate "Edit" window.
You find this possibility of quick editing in all of the "Print job"- and "Settings"-win-
dows which contain such listings. The order of the listed elements can be changed by
clicking in the header of the register.
Page 26
text box to define a name of the printing press
text box (not mandatory)
text box (not mandatory)
1 – 6 for ExPresso Basic, 1 – 16 for ExPresso Pro
max. 100
in mm, max. 100 mm
if the printing press has a reversing unit, the location
can be set
Manual TECHKON SpectroDrive Chapter 3 – How to use SpectroDrive