5.
Press the FEED key to select an emulation switching mode.
Each press of the FEED key cycles through the emulation mode options of DMX mode, ZPL
mode, and EPL mode.
Emulation mode
DMX mode
ZPL mode
EPL mode
6.
Press and hold the FEED key for at least 3 seconds.
7.
Release the FEED key once the buzzer emits a long tone and then press the FEED key
again.
The selected emulation mode is set, and the printer restarts.
To cancel setting the emulation mode, continue pressing and holding the FEED key for
at least 3 seconds without releasing your finger at step 7.
The buzzer emits 4 short tones, and the printer restarts.
7.5 HEX Dump Mode
This mode is used to print a hex dump list (data received by the printer represented in
hex values) for confirmation of the data content.
Load media and then perform the following procedure.
1.
Turn on the power to the printer while pressing and holding the FEED key to start the
printer in special function mode.
Buzzer
1 short tones
Press the FEED key ↓
2 short tones
Press the FEED key ↓
3 short tones
Press the FEED key↓
Returns to DMX mode.
Example of dump list printing
78
—
Status LED
Color
Green
Green
Amber
—
Interval
Flashes
Flashes quickly
Flashes