Citizen CL-E321 User Manual page 75

3. Press and hold the FEED key for at least 3 seconds.
4. Release the FEED key once the buzzer emits a long tone.
The printer is now in test print mode.
5. Press the FEED key to select the media.
Each press of the FEED key toggles between label media and continuous media.
Media
Label media
Continuous
6. Press and hold the FEED key for at least 3 seconds.
7. Release the FEED key once the buzzer emits a long tone.
The test print process starts.
Ÿ Once the test sample has been printed, press the FEED key to print another test sample
without a feed operation.
8. Once the test sample has been printed, turn the power to the printer off and on again
to reset the printer in the normal startup mode.
 To cancel test printing, continue pressing and holding the FEED key for at least 3 sec-
onds without releasing your finger at step 7.
The buzzer emits 4 short tones, and the printer restarts.
CAUTION
Normal mode printing can also be performed when the printer is in test print mode. Note that
pressing the FEED key while the printer is in test print mode will not feed media. Instead, it will
print a test sample.
Buzzer
1 short tones
Press the FEED key ↕
2 short tones
75
—
Status LED
Color
Green
Green
—
Interval
Flashes
Flashes quickly