Emulation Switching Mode - Citizen CL-E321 User Manual

5. Press and hold the FEED key for at least 3 seconds.
6. Release the FEED key once the buzzer emits a long tone.
The configuration print process starts.
Once the configuration has been printed, the printer will be in the online state.
7. To print configurations that include default settings, continue pressing and holding the
FEED for at least 3 seconds without releasing your finger at step 6.
8. Release the FEED key once the buzzer emits a long tone and then press the FEED key
again.
The process to print a configuration that includes default settings starts.
Once the configuration has been printed, the printer will be in the online state.
 To cancel configuration printing, continue pressing and holding the FEED key for at
least 3 seconds without releasing your finger at step 7.
The buzzer emits 4 short tones, and the printer restarts.

7.4 Emulation switching mode

This mode is used to change the command set used.
The default setting is [DMX mode].
1. Turn on the power to the printer while pressing and holding the FEED key to start the
printer in special function mode.
2. Press the FEED key 4 times to select emulation switching mode.
The buzzer emits 4 short tone.
The status LED also flashes quickly in amber.
3. Press and hold the FEED key for at least 3 seconds.
4. Release the FEED key once the buzzer emits a long tone.
The printer is now in emulation switching mode.
77
— —