HTTP Server
The Web monitoring function can be used to configure printer and network settings.
Refer to the pages describing the Web monitor for more information.
Port No.
Max. simultaneous connections
HTTP version
DHCP
Automatically retrieves IP address information from a DHCP server within 60 seconds
after the power is turned on.
If IP address information cannot be retrieved automatically, a fixed IP address (default
is 169.254.1.10) is applied.
SNMP Agent
SNMP Version
Port No.
Supported MIBs
Community name
Connector Connections
Pin No.
1
2
3
4
5
6
7
8
Compatible connectors
Printer: RJ-45 connector
LED operation
The following table describes port LED operation.
1. Network communication speed indicator
Communication speed
100 Mbps
10 Mbps/disconnected
Refer to 6. Configuring Printer Settings Using a Browser
80
4
HTTP/1.1
SNMPv2 (Trap function not supported)
161
HOST-RESOURCES-MIB and Citizen-MIB (Private)
public
Signal
TX+
TX-
RX+
N.C.
N.C.
RX-
N.C.
N.C.
2
LED (Green)
On
Flashes
98
—
—
Function
Transmit (positive)
Transmit (negative)
Receive (positive)
Receive (negative)
1
-
-
-
-