Feed Key Operation - Citizen CL-E321 User Manual

Ÿ Turning on the power to the printer while pressing and holding the FEED key
with the cover closed changes starts the printer in the special function mode.
Other key operation varies depending on the currently selected mode. Refer to
"FEED Key Operation" for more information.

2.3 FEED Key Operation

Online state (status LED is solid green)
(1) Press the FEED key while the printer is not receiving data to feed media.
Ÿ If label media is specified, the printer automatically stops after detecting the
beginning of media. If continuous media is specified, the printer stops after a
certain amount of feed operation.
Ÿ If Tear off mode is selected in the Function Select setting, the printer feeds me-
dia to the tear-off position.
Ÿ For models with a cutter, the printer will feed media to the cut position and then
cut the media.
(2) Press and hold the FEED key for at least 3 seconds while the printer is not receiv-
ing data to change the operation mode to the online configuration mode.
Printing (status LED is solid or flashing in green)
Press the FEED key while the printer is printing or receiving data to pause the printer.
The status LED turns off, and the printer pauses.
Ÿ
If the FEED key is pressed while the printer is printing, the printer will finish printing
Ÿ
the current label and then stop.
Press the FEED key again to resume printing operation for the remaining labels in
the print job.
Paused (status LED is off)
Press and hold the FEED key to change to the clear job mode.
Error/alarm has occurred (status LED flashes in red, green, or amber)
Press the FEED key to clear the error or alarm.
Refer to 7. Configuring the Printer Using the Operation Panel
Refer to 9. Clearing Jobs Stored in the Printer
21
—
Refer to 8. Online Configuration Mode
—