Setup Flow - Epson TM-P60 Technical Reference Manual

2.2 Setup Flow

You have to set up your printer to use it. And you can adjust some features by customizing
them. This section describes the setup.
The setup flow of preparing to use printer is below.
2-4 Setup
1. Printer setup
❏ Set up the printer (set the strap and remove the belt clip)
See "2.3 Setting up the Printer" (page 2-5).
❏ Install Roll Paper
❏ Install the battery pack or connect the printer to the AC adapter
(See "2.5 Providing power to the printer" (page 2-8))
❏ Self test printing (See "3.5.1 Self test mode" (page 3-3)
2. Bluetooth connection set by host computer. (See"2.6 Bluetooth
Connection" (page 2-12))
3. Adjust various settings (If you need to)
(Adjust settings such as paper roll width, print
density, Bluetooth pass key, device name, serial
communication setting)
4. Complete setup
Rev. C