Power Led; Error Led; Feed Button - Epson TM-P60 Technical Reference Manual

❏ POWER LED
❏ ERROR LED
❏ BATT. LED
❏ FEED button
2.1.2.1 LED
POWER

POWER LED

Meaning
On Power is on.
Off Power is off.
Flashing The printer is in power-off operation or is in an area where wireless communication is not possible.
ERROR
Printer Condition
Power On
Power Off, battery installed, and
AC adapter connected
BATT.
Printer Condition
Power On without AC adapter
Power Off and battery installed
2.1.2.2 Control Panel Buttons
The control panel has a FEED button that you may have to use, although most paper handling
functions will be handled by your software.
FEED
Use this button to feed roll paper or to start a roll paper self test, or start printing status sheet.
( See "3.5.1 Self test mode" on page 3-3.)
2-2 Setup

ERROR LED

Meaning
On Printer is offline (paper out, power-on initialization, roll paper
cover open, power-off operation, or the remaining battery
charge is not enough for printer operation when the battery is
used to supply the power.)
Off Printer is online.
Flashing It indicates an error. See "3.1 LED Blinking Pattern" (page 3-1) for
troubleshooting
On Indicates that an abnormality occurred during battery
charging. The battery must be replaced with a new one.
Off No problem.
BATT. LED Meaning
On Remaining battery charge is not enough. It must be charged.
Off Remaining battery charge is adequate.
Flashing Remaining battery charge is below half.
On The battery is being charged.
Off The battery is fully charged.
Rev. C