Resetting The Printer; Hexadecimal Dump Mode - Epson TM-P60 Technical Reference Manual

3. Press the FEED button to continue printing. The printer prints a pattern using the built-in
character set.
Note:
If you would like to finish the test printing, turn off the power.
4. The self test automatically ends and cuts the paper after printing the following:
The printer is ready to receive data as soon as it completes the self test.
Note:
If you want to pause the self test manually, press the FEED button. Press the FEED button again to
continue the self test.

3.5.2 Resetting the Printer

Reset to initialize the printer's Bluetooth settings (passkey, device name).
1. Open the paper roll cover.
2. Turn the printer On while pressing the FEED button.
3. Press the FEED button 6 times.
4. Close the paper roll cover.
5. The reset procedures are printed. (Open the paper roll cover, press the FEED button, close
the paper roll cover.)
The reset begins after "Initialize" prints and the paper roll has been cut. The printer restarts
after initialization.
Note:
For the TM-P60, initialization completes several seconds after the paper roll is cut.

3.6 Hexadecimal Dump Mode

This feature allows experienced users to see exactly what data is coming to the printer. This can
be useful in finding software problems. When you turn on the hex dump function, the printer
prints all commands and other data in hexadecimal format, along with a guide section to help
you find specific commands.
To use the hex dump feature, follow these steps:
1. After you make sure the printer is off, open the roll paper cover.
2. While you hold down the FEED button, turn on the printer.
3-4 Troubleshooting
*** completed ***
Rev. C