Epson TM-P60 Technical Reference Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. Mobilink TM-P60
  6. Technical reference manual

Epson TM-P60 Technical Reference Manual

Hide thumbs Also See for TM-P60:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Programming Manual, Technical Reference Manual
TM-P60
Technical Reference
guide
English
EPSON
Rev. D
405018203

Advertisement

Table of Contents
loading

Related Manuals for Epson TM-P60

Summary of Contents for Epson TM-P60

  • Page 1 TM-P60 Technical Reference guide English EPSON Rev. D 405018203...
  • Page 3 ❏ Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.)
  • Page 4 ❏ Never disassemble or modify this product or the installed Radio Frequency module. ❏ Seiko Epson Corporation shall not be liable for interference to radio/TV resulting from changes or modifications to this product or the installed Radio Frequency module not expressly approved by Seiko Epson Corporation.
  • Page 5 TM-P60 Technical Reference Guide • Other equipment that uses the same frequency band used by the Radio Frequency module that can be installed in this product includes equipment for industry, science and medical treatment, microwave ovens, HomeRF, and radio and other broadcasting equipment (both ones that require a license and ones that do not require a license).
  • Page 6 RF Module Standards for Oceania added. About This Manual Aim of the Manual This manual was created to provide information on the TM-P60 printer for anyone who is developing hardware, installations, or programs. Programmers will also want to consult other documents.
  • Page 7 TM-P60 Technical Reference Guide Chapter 4, “Application Development Contains information on such matters as DIP Information.” switches, memory switches, error processing for using TM-P60 Appendix A, “The Difference Between Comparison between TM-P60 and TM-P60 and TM-T88II/III.” TM-T88II/III. Appendix B, “Wireless LAN Setup User’s Manual for TM Net Win Config...
  • Page 8 This is a OCX driver EPSON OPOS ADK Manual This provides information for anyone who is programming using OPOS. This is included in the EPSON OPOS ADK EPSON Advanced Printer Driver This is a Windows driver EPSON Advanced Printer Driver Manual...

  • Page 9: Safety Precautions

    Safety Precautions EMC and Safety Standards Applied Product Name: TM-P60 Model Name: M196A The following standards are applied only to the printers that are so labeled. (EMC is tested using EPSON power supplies.) North America: EMI: FCC/ICES-003 Class B Safety: UL 60950/CSA C22.2 No. 60950...

  • Page 10: Declaration Of Conformity

    According to ISO/IEC Guide 22 and EN 45014 Manufacturer: SEIKO EPSON CORPORATION Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 JAPAN Representative: EPSON Engineering Europe S.A. Address: Parc Technologique Europarc 60, Rue Auguste Perret 94043 Creteil Cedex France Declares that the Product: Product Name: Printer Model Name: M196A...
  • Page 11 Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The TM-P60 has been tested and found to comply with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. The maximum SAR value tested for the TM-P60 has been shown to be 0.144W/kg at the body.
  • Page 12 Italy In Italy, if used outside of own premises, general authorization is required. The TM-P60 can be Used Only in the Countries Listed Below: Austria, Belgium, Germany, Luxembourg, Netherlands, Switzerland, France, Italy, Greece, Spain, Portugal, Denmark, Finland, Ireland, Sweden, UK, USA, Canada, Czech Republic, Estonia, Hungary, Lithuania, Latvia, Poland, Slovenia, Slovak Republic, Norway, Australia, and New Zealand.
  • Page 13 Continued use may lead to fire or electric shock. Immediately unplug the equipment and contact your dealer or a Seiko Epson service center for advice. ❏ Never attempt to repair this product yourself. Improper repair work can be dangerous.
  • Page 14 Be sure to push the prongs all the way in. ❏ If the cord becomes damaged, obtain a replacement from your dealer or a Seiko Epson service center. CAUTION: ❏ Do not connect cables other than as described in this manual. Different connections may cause equipment damage and burning.

  • Page 15: Table Of Contents

    Related materials for TM-P60 ........3...
  • Page 16 Appendix A The Difference Between TM-P60 and TM-T88II/III Can TM-P60 print with TM-T88II/III printer driver? ..... . 1 Can TM-P60 send back status to host PC the same as TM-T88II/III? ..1...
  • Page 17 General Features of EPSON OPOS ADK (OPOS Control) ..3 EPSON OPOS ADK Contents ....... . 4 EPSON OPOS ADK Supported Environment .
  • Page 18 Network is disconnected several minutes after it is connected..3 TM-P60 turns off several minutes after it is turned on....4 Printing is not possible.

  • Page 19: Chapter 1 General Information

    Chapter 1 General Information 1.1 Features The TM-P60 is a POS printer designed to meet the needs of both retail and hospitality for high- speed, on-the-go thermal printing. 1.1.1 General ❏ Compact size with rugged design to ensure top reliablility ❏...

  • Page 20: Product Structure

    1.2 Product Structure 1.2.1 Standard Parts Included with the Printer This printer is packed with the materials listed below. ❏ User’s Manual ❏ Roll paper: 1 roll ❏ Battery pack unit (LIP-2500), and its User’s manual: 1 ❏ AC adapter (included only with some models): 1 Note: To charge the battery, you have to use “PS-10”...

  • Page 21: Related Materials For Tm-P60

    This is an exclusive battery charger. To use it you must take the battery out of the TM-P60. The charging period: 2.5 hours. OT-RS60 This is to connect TM-P60 and host PC with serial connection. LIP-2500 This is a spare battery. It is the as same as ithe ncluded one. Options OT-ST60 This is a shoulder strap.

  • Page 22: Product Specifications Overview

    Capacity: 2200 mAh Output voltage: DC 12 V Power AC adapter Input voltage: AC 100 V ~ 240 V consumption (option) Product name: PS-10, Trade name: Seiko Epson Corporation Mechanism 10,000,000 lines printing Print head 100,000,000 dots Life Autocutter 500,000 cuts Operation 5 ~ 45°C, 10 ~ 90% RH...

  • Page 23: Chapter 2 Setup

    TM-P60 Technical Reference Guide Chapter 2 Setup 2.1 Part Name and Basic Operation 2.1.1 Part names RS232C I/F connecter cover open control roll paper connector for AC button panel cover adapter (option) clip battery cover 2.1.2 Control Panel The control panel is shown below.

  • Page 24: Led

    ❏ POWER LED ❏ ERROR LED ❏ BATT. LED ❏ FEED button 2.1.2.1 LED POWER POWER LED Meaning Power is on. Power is off. Flashing The printer is in power-off operation or is in an area where wireless communication is not possible. ERROR Printer Condition ERROR LED...

  • Page 25: Beeper Function

    TM-P60 Technical Reference Guide Note: The FEED button can be disabled by using an ESC/POS command. Refer to “ESC/POS Application Programming Guide” for details. 2.1.3 Beeper Function This printer has a “beeper“ function. This function causes beeping in specified situations. The situations are the following: ❏...

  • Page 26: Setup Flow

    2.2 Setup Flow You have to set up your printer to use it. And you can adjust some features by customizing them. This section describes the setup. The setup flow of preparing to use printer is below. 1. Printer setup ❏...
  • Page 27 Ignore the beeping. (see “3.2.1 Beeping Types” (page 3-2) for the beeping pattern.) When you use OPOS (OCX driver from EPSON) or the Advanced Printer Driver, you need to install the driver. When you use ESC/POS commands, you don’t have to install drivers. For information on these drivers, see “D.1 Control Method”...

  • Page 28: Installing/Replacing The Roll Paper

    2.3 Installing/Replacing the Roll Paper 1. Press the button to open the roll paper cover. 2. Remove the used roll paper core if there is one, and insert the new roll paper. Note: Note the direction the paper comes off the roll. Do not use paper rolls that have the paper glued to the core.
  • Page 29 TM-P60 Technical Reference Guide 3. Set the new roll paper on the inside of the roll paper cover. Note: Note the direction the paper comes off the roll. 4. Pull the leading edge of the roll paper. 5. Align the left edge of the roll paper with the edge of the cover.

  • Page 30: Providing Power To The Printer

    2.4 Providing power to the printer You can supply power through the battery pack packaged with the printer or the AC adapter provided as an option. WARNING: Be sure to use the battery that came with the printer. Using a battery other than the one specified may cause fire, explosion, leakage, overheating, or other damage.

  • Page 31: Charging The Battery

    (It is covered by a cap) Connect AC adapter to here opening the cap WARNING: Make sure you use the EPSON PS-10 AC adapter or equivalent. Using an incorrect AC adapter may cause fire or electrical shock. Rev. D Setup 2-9...

  • Page 32: Adjusting Various Settings

    2.5 Adjusting Various Settings This printer is able to be adjusted for the items below: ❏ DIP switch (handshake of serial communication conditions) ❏ Memory switch (serial communication conditions, roll paper width, print density, etc...) ❏ Roll paper width (58mm / 60mm) Adjusting the spacer and memory switch The current settings can be confirmed by a self test.

  • Page 33: Memory Switches

    TM-P60 Technical Reference Guide DIP switch Handshake DSW1 DSW2 DSW3 DSW4 DTR/DSR RTS/CTS DSW 1 is fixed to OFF. Note: Serial communication setting is assigned to MemorySwitch (baud rate, parity). See the table “ Customize values” (page 2-12) for details.
  • Page 34 Note: Msw 8-1: When On is selected, this printer transmits power-off notice, power-on notice, and battery status to a host PC. When off is selected, this printer doesn’t transmit these. Msw 8-2: When On is selected, the printer beeps the buzzer for 10 seconds when the battery status enters “battery level is L“...

  • Page 35: Adjusting Roll Paper Width

    TM-P60 Technical Reference Guide 2.5.4 Adjusting Roll paper width The TM-P60 accommodates 58 mm {2.28"}, and 60 mm {2.36"} wide paper rolls. The roll paper guide is removed to change the roll paper width to 60mm. The method of removing the guide is following below.

  • Page 36: Installing Your Wireless Lan

    2.6 Installing your wireless LAN This section describes how to install a wireless LAN in this printer. The following shows you the installation procedure. “2.6.1 Preparing a host PC for setting up a printer,” (page 2-15) When you set up When you set up printer using printer using...

  • Page 37: Preparing A Host Pc For Setting Up A Printer

    When you set up the printer by using wireless LAN, the LAN setting of host PC is changed to correspond to the LAN setting of TM-P60 temporarily. There are three way for instaling TM-P60 to wireless LAN. The following table lists required setting item for trial host PC.

  • Page 38: Adjusting The Host Pc To The Printer's Lan Setting

    Note: The printed result (Status sheet) is necessary at the next step. The printer may beep when turned on. It is caused by the host PC’s LAN setting not corresponding to the printer’s setting. Ignore the beeping. When you connect serial cable (RS-232C) at turning on printer, this mode is disable. 2.6.3 Adjusting the host PC to the printer’s LAN setting When you set up the printer with serial interface, omit this section and read from “2.6.4 Connecting a serial interface cable”...

  • Page 39: Confirming The Connection Between The Host Pc And Printer

    See “B.2.1 Install” on page B-4. When you connect TM-P60 to host PC with serial cable, you have to use the utility to confirm the connection. See “2.6.5.1 When you use the Utility (TMNetWinConfig) to set up the connection” (page 2- 18).

  • Page 40: When You Use The Utility (Tmnetwinconfig) To Set Up The Connection

    Turn the printer on. • Without connecting a serial cable to the TM-P60, confirm that the “Search Method,“ and “Search Option IP“ are correct. You have to set it to correspond to the printer. “Search Path“; Menu:Tool -> “Search Method.“...

  • Page 41: When You Use A Browser For Setup

    Search Method Search Option IP • When you use serial cable, confirm connect a serial cable to the TM-P60 and host PC, and turn the printer on again. • With connecting a serial cable to the TM-P60 and host PC, confirm that the “Search Method,“...

  • Page 42: Adjusting The Printer Lan Setting For Your Wireless Lan

    4. When following screen is shown, the confirmation is complete. Note: If the screen doesn’t appear, see “Q 6. The TM-P60 can’t connect to the Wireless LAN. What should I do?” (page E-2). 2.6.6 Adjusting the printer LAN setting for your wireless LAN 2.6.6.1 When you use the utility (TMNetWinConfig) to set up...
  • Page 43 1. Select the printer from the list view. Note: When you use multiple TM-P60 printers, you can distinguish each TM-P60 with a MAC address. The MAC address can be confirmed by the status sheet. See “2.6.2 Confirming the current LAN setting of the printer”...
  • Page 44 We recommend to define WEP key as 128bit, Hexadecimal to secure security. This printer doesn’t support the blank SSID ““(any). Enter one character into the SSID at least. Ad-Hoc mode is for default value only. See “Q 1. Can I use the TM-P60 in the Ad-Hoc mode?” (page E-1) for detail.

  • Page 45: When You Use A Browser For Setup

    TM-P60 Technical Reference Guide Note: We recommend to confirm the changed wireless LAN setting by status sheet printing after changing the LAN setting. (see “2.6.2 Confirming the current LAN setting of the printer” (page 2-15)) 2.6.6.2 When you use a browser for setup In this step, change the LAN setting of printer to the setting of the wireless LAN installed in the printer from the trial host PC.
  • Page 46 We recommend define WEP key with 128bit, Hexadecimal to secure security. This printer doesn’t support the blank SSID ““(any). Enter one characters into SSID at least. Ad-Hoc mode is for default value only. See “Q 1. Can I use the TM-P60 in the Ad-Hoc mode?” (page E-1) for detail.

  • Page 47: Confirm The Connection Between Your Lan And Printer

    LANsetting of printer. 2.7 Install a Printer Driver in the Host PC / POS Terminal EPSON provides printer drivers for the TM-P60. The drivers are OPOS and Advanced Printer Driver (APD). They are for the Windows® environment.
  • Page 48 Outline of install and setup procedure is as follows. START 1. Installation OPOS ADK (Execute the Setup.exe in DISK1, and continue to installation by wizard) Is installation completed? ERROR Completed For detail refer to [ User Manual] 2. Setup the OPOS & device setting by using SetupPOS utility You can setup the OPOS and device setting by the SetupPOS utility.
  • Page 49 TM-P60 Technical Reference Guide 2.2. Device communication test by executing the CheckHealth ResultCode ERROR SUCCESS Confirm the error condition by The OPOS and device settings are right. referring to the [User's manual] & The Install and Setup are completed. (3. Confirmation by sample program) 4.

  • Page 50: Package Contents Of Epson Opos Adk

    Visual Basic and Visual C++ programs. In this manual, it is introduced in the form of Visual Basic. 2.7.1.2 Package contents of EPSON OPOS ADK Package contents of EPSON OPOS ADK are same as that of the previous one. ❏ Installer ❏ SetupPOS Utility ❏...

  • Page 51: Advanced Printer Driver (Apd)

    2.7.2 Advanced Printer Driver (APD) 2.7.2.1 Installing and Setting Up When you install and set up the APD, please refer to the “EPSON Advanced Printer Driver Install Manual.“ The Manual is a PDF file, which is provided with other manuals for the APD.
  • Page 52 2-30 Setup Rev. D...

  • Page 53: Chapter 3 Troubleshooting

    TM-P60 Technical Reference Guide Chapter 3 Troubleshooting This section describes general troubleshooting. 3.1 LED Blinking Pattern 3.1.1 Error Types The printer stops all printer operations, goes offline, and the ERROR LED blinks when an error is detected. ERROR LED Blinking Pattern...

  • Page 54: Printer Beeps

    3.2 Printer Beeps 3.2.1 Beeping Types The printer beeps in some situations. The beeping patterns are as follows. Beeping Switch method to Beeping Pattern The beeping indicates mean times Enable/disable • Battery remaining amount is “L level” 5 times Memory switch specify 1000 ms ON 1000 ms OFF or less...

  • Page 55: To Confirm The Current Setting Of The Printer

    TM-P60 Technical Reference Guide 2. Remove the jammed paper. 3. Close the roll paper cover. Transmit the error recovery command. Note: For error recovery command information, see the manual for each control method (OPOS, Advanced Printer Driver, ESC/POS commmand). 3.5 To Confirm the Current Setting of the Printer This printer has two functions to confirm the current setting of the printer.

  • Page 56: Status Sheet Printing

    The printer is ready to receive data as soon as it completes the self test. Note: If you want to pause the self test manually, press the FEED button. Press the FEED button again to continue the self test. 3.5.2 Status sheet printing The status sheet describes the wireless LAN setting of printer.

  • Page 57: Radio Field Intensity Check Mode

    TM-P60 Technical Reference Guide 3.6 Radio Field Intensity Check Mode This mode prints the current radio field intensity on roll paper. This mode is useful to confirm that the printer can communicate with an access point at the current location by radio.

  • Page 58: Resetting The Printer

    Reset the printer’s LAN setting to be certain it is correct. This mode is useful when you need to set the wireless LAN setting of a TM-P60 when the setting cannot by changed by an Access point, serial cable, or TMNetWinconfig. In this case, reset the printer to change the printer to Ad-Hoc mode for communication without any access point.
  • Page 59 TM-P60 Technical Reference Guide 4. Run any software program that sends data to the printer. The printer prints “Hexadecimal Dump” and then all the codes it receives in a two-column format. The first column contains the hexadecimal codes and the second column gives the ASCII characters that correspond to the codes.
  • Page 60 3-8 Troubleshooting Rev. D...

  • Page 61: Chapter 4 Application Development Information

    OPOS, or Windows Printer Driver (APD). 4.1.2 For Radio field intensity Wireless communication is related to radio field intensity. The TM-P60 has a function,“Radio Field Intensity Check Mode” (page 3-5), to confirm the current radio field intensity. This mode shows the current radio field intensity to the operator.

  • Page 62: Operation Tested Access Point Products

    4.1.3 Operation tested Access point products The Access points that have been evaluated with the TM-P60 are in the following table. For the latest information, see the appropriate web site below: For customers from North America, go to the following web site: http://pos.epson.com/ For customers from other countries, go to the following web site: http://www.epson-pos.com/...

  • Page 63: Opos

    The power management function is to save the battery. This function can be set from TMNetWinconfig [“Power Management Setting” (page B-25)]. However, some Access points don’t’t use this function with the TM-P60. See “Operation tested Access point products” (page 4- 2) for details.

  • Page 64: Advanced Printer Driver

    In the Advanced Printer Driver, you have to use “Control font A.” The procedure is described below. Note See the user’s manual of the Advanced Printer driver for detail of the utility “EPSON Control font.“ 1. Open the properties of printer. 2. Click the “utility“ tab.

  • Page 65: Printer Status On Apd

    TM-P60 Technical Reference Guide Roll Paper cover status Roll paper cover is open or closed FEED button status Paper feed button is pressed or not Error status Various error information (Off-line / On-line), (detail of the error; Mechanical error, autocutter error, auto-recovery error, unrecoverable error) The statuses are useful for the following situations.

  • Page 66: Printer Errors And Status

    PTR_SUE_COVER_OK Cover is closed. PTR_SUE_REC_EMPTY Receipt paper is out. PTR_SUE_REC_PAPEROK Receipt paper is OK. PTR_SUE_IDLE Printer State is idle. When the FlagWhenIdle property is set to TRUE, PTR_SUE_IDLE is sent to inform the application that the printer is idle. Other than when data is being sent, the printer is in an idle state, so if FlagWhenIdle is TRUE, an event will be fired when printing is finished.

  • Page 67: Esc/Pos Commands

    When you use User NV memory area by using OPOS or APD, you have to use “Direct I/O method” or “Control A font.” Please contact EPSON or your dealer for details. Note the following when writing to and erasing NV memory.

  • Page 68: Nv Graphics Printing

    NV graphics data shares the domain used by user NV memory record data; therefore, the entire capacity of the domain to which NV graphics data and user NV memory data are defined is targeted. The TM-P60’s entire capacity is 384 KB.

  • Page 69: Opos

    NV graphics data shares the domain used by user NV memory record data; therefore, the entire capacity of the domain to which NV graphics data and user NV memory data are defined is targeted. The TM-P60’s entire capacity is 384 KB.

  • Page 70: Printable Bitmap Format In Opos

    Note2 : limitation of ”ESC |cA” and “ESC |rA” *During rotated printing mode (Left90, right90), these escape sequences will not work. *These will not work if they are not the first character of a line. *It is not possible to use these on PrintBitmap method. 4.6.2.4 Printable bitmap format in OPOS The printable bitmap formats are formats that meet all the following conditions.

  • Page 71: Appendix A The Difference Between Tm-P60 And Tm-T88Ii/Iii

    The Difference Between TM-P60 and TM-T88II/III TM-P60 is able to print with 42 print columns (when paper width is 58mm and Font B is printed [default]). The number of print columns is the same as that of the TM-T88II/III (when paper width is 80mm and Font A is printed [default].) Therefore,the TM-P60 is able to print with same...
  • Page 72 Rev. D A-2 The Difference Between TM-P60 and TM-T88II/III...

  • Page 73: Appendix B Wireless Lan Setup Detailed Information

    For instructions on the wireless LAN setting of the TM-P60 using TMNetWinConfig (utility), see “TMNetWinConfig” on page B-4. For instructions on wireless LAN setting of the TM-P60 using your web browser see “Setting Using a Web Browser” on page B-28.

  • Page 74: Windows Xp

    2. Click Properties and check whether the Internet Protocol (TCP/IP) check box is checked. If not, click the check box. Note: After the TCP/IP is installed, restart your computer and move on to the Installing TMNetWinConfig section. B.1.2 Windows XP 1.
  • Page 75 TM-P60 Technical Reference Guide 2. Double-click the Local Area Connection icon. The Local Area Connection Status dialog is displayed. 3. Click Properties and check whether the Internet Protocol (TCP/IP) check box is checked. If not, click the check box. Rev. D...

  • Page 76: Tmnetwinconfig

    Note: After the TCP/IP is installed, restart your computer and move on to the Installing TMNetWinConfig section. B.2 TMNetWinConfig This section describes the details of the TMNetWinConfig, which is a utility for setting up a wireless LAN environment. B.2.1 Install Note: After TMNetWinConfig is installed, if you add or remove protocols or services, TMNetWinConfig might not work correctly.
  • Page 77 TM-P60 Technical Reference Guide 4. The License Agreement dialog is displayed. After confirming the contents, Click Yes. 5. The Choose Destination Location dialog is displayed. Select the folder for installation and click Next. The default is “C:\Program Files\EpsonNet\EpsonTMNetWinConfig\.” Rev. D...

  • Page 78: Windows Xp

    6. The Select Program Folder dialog is displayed. Select the program folder for installation and click Next. The default is “EpsonTMNetWinConfig.” 7. When the installation is finished, click Finish. B.2.1.3 Windows XP 1. Unzip the file and start Setup.exe. 2. The Choose Setup Language dialog is displayed. Select the language and click OK. Rev.
  • Page 79 TM-P60 Technical Reference Guide 3. The Welcome dialog is displayed. Click Next. 4. The License Agreement dialog is displayed. After confirming the contents, Click Yes. Rev. D Wireless LAN Setup Detailed Information B-7...
  • Page 80 5. The Choose Destination Location dialog is displayed. Select the folder for installation and click Next. The default is “C:\Program Files\EpsonNet\EpsonTMNetWinConfig\.” 6. The Select Program Folder dialog is displayed. Select the program folder for installation and click Next. The default is “EpsonTMNetWinConfig.” Rev.

  • Page 81: Operating

    Here, as an example, how to set the IP Address in Windows XP is explained. 1. Make sure Windows is running and a TM-P60 is turned on. 2. Click Start, point to All Programs, point to TMNetWinConfig; then click TMNetWinConfig.
  • Page 82 If you have connected more than one printer to the network and do not know for which printer you want to set the IP address, you can check the printer by finding out the MAC address of the TM-P60. The MAC address can be found on the status sheet.
  • Page 83 When “Method for specifying the IP address: Auto” is specified when there is no DHCP server, the TM- P60 gets the IP address by APIPA (Automatic Private IP Addressing) method. In this case, the TM-P60 requires about 1 minitue to get the IPaddress after the power is turned on.
  • Page 84 For information on the password function, see “password” on page B-28. CAUTION: After clicking OK, you must not turn off the printer while the new settings are being sent to the TM-P60. Rev. D B-12 Wireless LAN Setup Detailed Information...
  • Page 85 9. The update is complete when the message “Configuration has been successfully completed” appears; then click OK. 10. When the message “Transmission is complete” appears, click OK. Note: To get the information for the TM-P60 for the other segments, see the Functions section below. Rev. D Wireless LAN Setup Detailed Information B-13...

  • Page 86: Functions

    List view Indicates the information for the TM-P60. Launch Browser Select the Model Name and then click this button. Broswser is run and shows you to configure from web brawser.

  • Page 87: Menu Bar

    About TMNetWinConfig Version information and copyright information. When you use this function, Windows printing cannot be done while opening the TMNetWinConfig. You should use this option only if you connect TM-P60 with an RS-232C cable to your PC. Time-out Use Time-out setting to set the time-out for data transmission and reception. This can be set from 2 to 120 seconds.
  • Page 88 Selectable Search method is set individually. Note: When you use check “Select All“ or “COM,“ Windows printing cannot be done while opening the TMNetWinConfig. You should use this option at only if you connect the TM-P60 with an RS-232C cable to your PC. Rev. D...
  • Page 89 TM-P60 Technical Reference Guide Search Options - IP This function is to search for print servers in other segments. Set the network address and the subnet mask. Select Refresh from the View menu or restart TMNet WinConfig to activate the settings.
  • Page 90 Set the flow control. Set either NONE, RTS/CTS, or DTR/DSR. Note: The TM-P60 supports only the baud rates 9600, 19200, and 384000. When you specify another baud rate with the utility, the utility can’t communicate with the TM-P60. Rev. D...
  • Page 91 TM-P60 Technical Reference Guide Firmware Update When you select this menu, the Firmware Update wizard starts up. Usually you don’t need to use this function. Help Topics Help for the TMNetWinConfig is displayed. Rev. D Wireless LAN Setup Detailed Information B-19...

  • Page 92: Settings

    B.2.4 Settings Start up TMNETWINCONFIG and click the printer you want to set, and then click the Configuration button. The settings dialog is displayed. The TM-P60 current setting contents can be confirmed and be changed. Setting contents of each head are explained below.
  • Page 93 Model Name Model Name of the TM printer is displayed. (TM-P60) Location TM-P60 cannot use this. • Return to Default button This returns the settings of the TM-P60 to the factory settings. Rev. D Wireless LAN Setup Detailed Information B-21...
  • Page 94 ❏ Path Information Information about Network Card is displayed. Item Explanation Search Path The protocol used by the Search and the protocol detected by the Search is displayed. ❏ Wireless Information Information about Wireless communication is displayed. Item Explanation Communication The IEEE communication standard type of the wireless LAN is displayed.
  • Page 95 Click the Wireless tab and the dialog below is displayed. Set the setting of the Communication Mode, SSID, and WEP. When you click the OK button, the host PC transmits the specified settings to the TM-P60. ❏ Basic Settings Set the basic setting of the Wireless communication...
  • Page 96 ❏ Using a WEP key When using the WEP Key, check the checkbox and set the following item Note: When clicking the “Use WEP Key” checkbox, WEP comes on and Authentication Method of Advanced Settings is set to “Shared Key” automatically. (See “Advanced Settings” on page B-25.) When the “Use WEP Key”...

  • Page 97: Advanced Settings

    Set either Shared key or Open System. Method ❏ Power Management Setting Note: When using the TM-P60 in the Ad-Hoc mode, this function is disabled. It depends on Access point whether using this function is possible or impossible. See “Power Management function” on page 4-3. Item...
  • Page 98 ❏ RTS/CTS Threshold Setting Item Explanation Set RTS/CTS Select RTS/CTS handshake control Disable or Enable. handshake control RTS/CTS Threshold [0- Set the value, 0-2347. 2347] ❏ Roaming Setting Item Explanation Set roaming Select Disable/Enable of the AP Density. AP Density Select the access point density as Low, Medium, or High.

  • Page 99: Ip Address Setting

    TM-P60 Technical Reference Guide TCP/IP Click the TCP/IP tab; the dialog below is displayed. Set the TCP/IP. ❏ Method for specifying the IP address Item Explanation Automatic/ Manual Select either Automatic/Manual for specifying the IP address. (Other items are disabled)

  • Page 100: Password

    Set your Web browser so that it does not use a proxy server. 1. Start Windows Internet Explorer (or your Web browser). 2. Input the IP address of the TM-P60 in the browser address bar and press Enter (Ex. http:// 192.168.192.168).
  • Page 101 TM-P60 Technical Reference Guide Note: If you are using the default settings of the TM-P60, click OK without entering a user name or password. If a password is required, you have to contact the Administrator of your wireless LAN. When you wish to reset the printer to the default setting, see “Resetting the printer” on page 3-6.
  • Page 102 4. You can modify the parameters by following the menus. You must click Submit to send the change to the printer and then click Reset to make the submission effective on each Web page. If you change the IP address, SSID, etc., you have to change the settings of the host PC and AP to match the printer’s setting.

  • Page 103: Function

    TM-P60 Technical Reference Guide B.3.2 Function B.3.2.1 Information General Click General, following screen is displayed. You can confirm the basic settings of the TM-P60. ❏ Interface Card Information of the Interface Card is displayed. Item Explanation Administrator Name Administrator Name is displayed.

  • Page 104: Refresh Button

    ❏ Wireless Information Information about the Wireless communication is displayed. Item Explanation Communication The IEEE communication standard type of the wireless LAN is displayed. Standard Network Mode The Network Mode of the wireless LAN is displayed. SSID The wireless Service Set of the print server is displayed. Channel The channel of the wireless LAN is displayed.
  • Page 105 TM-P60 Technical Reference Guide TCP/IP Click TCP/IP; the screen below is displayed. You can confirm the present setting of the TCP/IP. ❏ TCP/IP Information Item Explanation Get IP Address The setting condition of the IP Address setting method is displayed.

  • Page 106: Configuration

    Note: Even if you change each item with the setting screen of the TMNetWebConfig, the setting contents of the TM-P60 are not updated immediately. Click the SUBMIT button on the setting screen to send the setting contents to the TM-P60.
  • Page 107 TM-P60 Technical Reference Guide Wireless Click Wireless; the screen below is displayed. Set the Network Mode, SSID, and WEP. ❏ Wireless Basic Setting Set the basic setting of the Wireless communication. Item Explanation Network Mode Set the network mode of the wireless LAN to either the infrastructure mode or the Ad-Hoc mode.
  • Page 108 Set from Auto (1M-11M)/1M/2M/5.5M/11. RTS Threshold Select a value between 0 and 2347. • SUBMIT button Click this button after changing the setting contents to send the setting contents to the TM-P60. Rev. D B-36 Wireless LAN Setup Detailed Information...
  • Page 109 Set the Default Gateway. • SUBMIT button Click this button after changing the setting contents to send the setting contents to the TM-P60. Note: The “Set Using PING“ is changed to “disabled“ automaticaly after the IP address is defined by it. Rev. D...
  • Page 110 32 letters but the 16 letters from the head can be input.) • SUBMIT button Click this button after changing the setting contents to send the setting contents to the TM-P60. Rev. D B-38 Wireless LAN Setup Detailed Information...
  • Page 111 Enter the name • SUBMIT button Click this button after changing the setting contents to send the setting contents to the TM-P60. Note: The Trap items are “printer is turned on,” and all errors. Rev. D Wireless LAN Setup Detailed Information B-39...

  • Page 112: Administrator Setting

    Note: The “IP Address resolution printing function,“ it is for “Get IP address: auto“ function that prints a specified IP address at the TM-P60 is assigned IP address. • SUBMIT button Click this button after changing the setting contents to send the setting contents to the TM-P60.
  • Page 113 Input the new password again. • SUBMIT button Click this button after changing the setting contents to send the setting contents to the TM-P60. Note: The Password is common to the one which is set by TMNetWinConfig (“password” on page B-28.) Rev. D...
  • Page 114 Reset Click Reset; the screen below is displayed. Reset the setting of the TM-P60 to the first condition. ❏ Reset • Reset button When you click this button, the TM-P60 applies the changing and reboots itself. • FACTORY DEFAULT button When you click this button, the TM-P60 is returned to the factory setting.

  • Page 115: Appendix C Character Code Tables

    TM-P60 Technical Reference Guide Appendix C Character Code Tables C.1 Page 0 (PC437: USA, Standard Europe) (International character set) Rev. Character Code Tables C-1...

  • Page 116: Katakana)

    C.2 Page 1 (Katakana) Rev. C-2 Character Code Tables...

  • Page 117: Pc850: Multilingual)

    TM-P60 Technical Reference Guide C.3 Page 2 (PC850: Multilingual) Rev. Character Code Tables C-3...

  • Page 118: Pc860: Portuguese)

    C.4 Page 3 (PC860: Portuguese) Rev. C-4 Character Code Tables...

  • Page 119: Pc863: Canadian-French)

    TM-P60 Technical Reference Guide C.5 Page 4 (PC863: Canadian-French) Rev. Character Code Tables C-5...

  • Page 120: Pc865: Nordic)

    C.6 Page 5 (PC865: Nordic) Rev. C-6 Character Code Tables...

  • Page 121: Wpc1252)

    TM-P60 Technical Reference Guide C.7 Page 16 (WPC1252) Rev. Character Code Tables C-7...

  • Page 122: Pc866: Cyrillic #2)

    C.8 Page 17 (PC866: Cyrillic #2) Rev. C-8 Character Code Tables...

  • Page 123: Pc852: Latin2)

    TM-P60 Technical Reference Guide C.9 Page 18 (PC852: Latin2) Rev. Character Code Tables C-9...

  • Page 124: Pc858: Euro)

    C.10 Page 19 (PC858: Euro) Rev. C-10 Character Code Tables...

  • Page 125: Blank Page)

    TM-P60 Technical Reference Guide C.11 Page 255 (Blank page) Rev. Character Code Tables C-11...

  • Page 126: International Character Sets

    C.12 International Character Sets ASCII code (hexadecimal number) Country U.S. France Germany Denmark I Sweden Italy Spain I Japan Norway Denmark II Spain II Latin America Korea Rev. C-12 Character Code Tables...

  • Page 127: Appendix D System Planning

    VisualBasic. This makes it possible to have bi-directional communication with the TM printer under the Windows standard printer driver environment. Note: The statusAPI is the API for controlling the printer, which is supplied exclusively by EPSON. Using this enables obtaining printer status and transmitting ESC/POS commands. Rev. D...

  • Page 128: Epson Advanced Printer Driver Components

    Status API: Reference Manual EPSON Advanced Printer Driver Support Environment ❏ Supported interfaces • Serial, wireless LAN(802.11b) ❏ Supported Operating Systems: Epson has confirmed performance with the following: • Windows NT Ver 4.0 English Version SP5, SP6 • Windows 2000 English Version •...

  • Page 129: Epson Opos Adk

    When developing an OPOS confirmed application, use the following control methods. EPSON OPOS ADK has the following features. ❏ EPSON OPOS ADK supports not only the OPOS Control (CO + SO) proposed by the UnifiedPOS Committees but also totally supports the OPOS application development...

  • Page 130: Epson Opos Adk Contents

    EPSON OPOS ADK Contents Any installer later than EPSON OPOS ADK Ver2.10 supports the silent install function that can install the OPOS environment without a user interface, which offers easier installation. With this installer, OPOS Control for EPSON devices that are compatible with OPOS, manuals, utilities and sample programs described below can be installed.

  • Page 131: Esc/Pos Command

    D.1.3 ESC/POS Command Print/control by ESC/POS commands is direct control for TM printers using the ESC/POS commands proposed by EPSON. Sending ESC/POS commands to the printer from an application enables direct control of the printer. For the detailed information regarding the ESC/POS commands, contact the dealer where you purchased the product.
  • Page 132 Rev. D D-6 System Planning...

  • Page 133: Appendix Efaq

    When TM-P60 is turned on, it searches for an access point for wireless communication when TM-P60 is in infrastructure mode. (In Ad-Hoc mode, TM-P60 serches for an host PC which is in Ad-Hoc mode) If the TM-P60 is out of wireless communication range, the POWER LED flashes slowly and the buzzer sounds.

  • Page 134: The Power Led Is Flashing Slowly. What Should I Do

    A 5.1 Confirm the wireless setting of the TM-P60, AP, or PC. Print out a status sheet for the TM-P60. Set the settings such as the network mode of AP or PC, SSID, WEP, IP Address, and Channel to match the each other. See “Status sheet printing” (page 3-4) for how to print status sheet.

  • Page 135: Searching On The Network Takes Several Minutes

    When setting the TM-P60 with RS-232, TMNetWingConfig must be installed on the PC. Also, the serial setting of TMNetConfig must match the TM-P60. A 7.1 Turn on the TM-P60 again. After confirming the that TM-P60 is connected with the serial cable to the PC, turn the TM-P60 on again. A 7.2 The serial cable is not specified by EPSON.

  • Page 136: Tm-P60 Turns Off Several Minutes After It Is Turned On

    A 10.1 The period of time set for the auto power off of TM-P60 is not proper. When the TM-P60 is set “time for auto power off” by memory switch, the TM-P60 turns itself off automaticaly when it doesn’t receive any data in the specified period. Confirm the power management function of the TM-P60.

  • Page 137: Appendix F Wireless Lan Network Composition

    TM-P60 Technical Reference Guide Appendix F Wireless LAN Network Composition F.1 Network mode F.1.1 Infrastructure Mode This is a method for connecting to an existing wired network using an access point. If multiple access points are in the same proximity, set their channels at least five channels apart. For setting the access point, see the manual for the access point.

  • Page 138: Wireless Lan Security

    F.3 Wireless LAN Security F.3.1 Security of a wireless LAN Why does a wireless LAN need a security function? A wireless LAN is designed to be constructed easily without the labor of wiring, In the wired LAN environment, because the communication flows through a network cable, the cable must be connected physically to tap or monitor the communication contents and/or tamper with the data.
  • Page 139 TM-P60 Technical Reference Guide WEP Setting WEP is the function to encrypt the wireless data. It is currently the most effective standard security function. Because the factory setting for the WEP encryption key setting is Enabled, you must set it to Disabled to connect it to a wireless network. Once it is connected, you can set the WEP encryption key in the printer to the same as the key in the network.
  • Page 140 F-4 Wireless LAN Network Composition Rev. D...
  • Page 142 EPSON SEIKO EPSON CORPORATION Printed in Japan...

Table of Contents