Q2. Can The Buzzer Be Set Not To Sound; Q3. The Battery Led Is Illuminated Or Blinking. What Should I Do; Q4. The Power Led Is Slowly Blinking. What Should I Do; Q5. I Cannot Connect The Tm-P60 To Bluetooth. What Should I Do - Epson TM-P60 Technical Reference Manual

Q2. Can the buzzer be set not to sound?

A2.1 Change the memory switch settings.
You can set the memory switch settings so that the buzzer does not sound. See "Memory
Switches" (page 2-15) for details regarding the memory switch.

Q3. The battery LED is illuminated or blinking. What should I do?

A 3.1 he battery doesn't have a charge.
Check the battery LED status to confirm the battery level. (See "About the Battery Remaining
Amount" (page 4-2)).
See "Charging the battery" (page 2-9) for battery charging procedures.

Q4. The power LED is slowly blinking. What should I do?

A 4.1 Check the TM-P60 and host device's Bluetooth settings.
Use a utility to confirm the host device's Bluetooth settings. Print the TM-P60 self test to confirm
if the device is recognized. The passkey, device name, and Bluetooth address are printed on the
self test. See "To Confirm the Current Setting of the Printer" (page 3-3) for details on how to
print a self test.
A 4.2 Check that the TM-P60 is within Bluetooth communication range.
The host device may not be within communication range. If there are any objects between the
host device and the TM-P60, move the TM-P60 and check to see if the LED has stopped blinking.

Q5. I cannot connect the TM-P60 to Bluetooth. What should I do?

A 5.1 Check the TM-P60 and host device's Bluetooth settings.
Use a utility to confirm the host device's Bluetooth settings. Print a TM-P60 self test to confirm if
the device is recognized. The passkey, device name, and Bluetooth address are printed on the
self test. See "To Confirm the Current Setting of the Printer" (page 3-3) for details on how to
print a self test.
A 5.2 Another network is causing radio wave interference.
Radio wave interference can occur if a wireless LAN network is operating in the same area.
Move the devices to a different area if this is the case.
A 5.3 There is a noise source near the TM-P60.
Communication may be impeded if a microwave oven or motor is operating in the same
vicinity. Move the host device or TM-P60 and check that communication is possible farther
away from the noise source.
A 5.4 Check that the TM-P60 power is On.
Turn on power to the TM-P60 device.
D-2 FAQ
Rev. C