Setup
This chapter describes the product and peripheral device installation and setup procedures that need to be per-
formed before using the product.
Setup Flow
The information in this chapter follows the flow of product and its peripheral device setup as shown below.
9.
Checking the Nozzles by Test Printing on Cut Sheets (page 47)
1.
Product Installation (page 35)
2.
Connecting a Cash Drawer (page 36)
3.
Connecting a Power Supply (page 38)
4.
Loading Roll Paper (page 39)
5.
Installing the Ink Cartridges (page 40)
6.
Connecting to a Host (page 42)
7.
Attaching the Connector Cover (page 45)
8.
Adjusting LCD Backlight Brightness (page 46)
Chapter 2 Setup
34