1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. Mobilink TM-P60
  6. User manual

Epson TM-P60 User Manual

Hide thumbs Also See for TM-P60:
Table of Contents

Advertisement

Quick Links

Download this manual
English
User's Manual
412011401

Advertisement

Table of Contents
loading

Related Manuals for Epson TM-P60

Summary of Contents for Epson TM-P60

  • Page 1 English User’s Manual 412011401...
  • Page 2 Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and...

  • Page 3: Standards And Approvals

    The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of this device. You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your authority to operate the equipment.

  • Page 4: Important Safety Information

    Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment and contact your dealer or a Seiko Epson service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous.

  • Page 5: Safety Label

    TM-P60 with Peeler User’s Manual 5...

  • Page 6: Notes On Use

    Dispose of used batteries according to the instructions. External Power Supply This product is intended to be supplied by AC adapter EPSON PS-10 (Model: DA- 42Y12) or a Listed Power Unit marked "Class 2" or "LPS," rated 12 V DC, 3.5A.

  • Page 7: Recycling The Batteries

    1-800-8-BATTERY for information on how to recycle this battery. Purpose of This Manual This manual provides information to operators of the TM-P60 with Peeler printer to describe basic operations to enable safe and correct use of the printer. Downloading Drivers, Utilities, and Manuals Drivers, utilities, and manuals can be downloaded from the following URL: http://www.epsonexpert.com/ and follow the on-screen instructions.

  • Page 8: Control Panel (Leds And Buttons)

    POWER Press the button to turn the power on or off. To turn off the power, you need to hold the button for more than 2 seconds. FEED Press the button to feed paper. 8 TM-P60 with Peeler User’s Manual...

  • Page 9: Installing And Charging Battery

    English Connecting to the Host Computer/Setting up the Printer For connecting the TM-P60 with Peeler to the host computer using Bluetooth® technology and for setting up the printer, go to http://pos.epson.com/ to see the TM-P60 with Peeler Bluetooth® Inter face Model Technical Reference Guide.

  • Page 10: Installing Or Replacing Roll Paper

    ERROR LED comes on. Be sure to remove the label before powering off the printer. Otherwise, the printer goes into the label removal waiting state when it is powered on again. 10 TM-P60 with Peeler User’s Manual...
  • Page 11 The factory default is set to On (buzzer sounds) to indicate the following: Remaining battery charge is not adequate Roll paper end Error Host disconnection (only for Bluetooth interface models) Transmission of status information (only for Bluetooth interface models) TM-P60 with Peeler User’s Manual 11...

  • Page 12: Troubleshooting

    Turn off the printer, open the peeler cover and the roll paper cover, and clean the thermal elements of the thermal head with a cotton swab moistened with an alcohol solvent (ethanol or IPA). See the illustration below. EPSON recommends cleaning the thermal head periodically (generally every 3 months) to maintain print quality. Thermal head...

  • Page 13: Cleaning The Platen Roller/Roll Paper End Sensor

    If you leave the rollers in such a condition, the glue may stick to issued labels, or a paper jam may occur. To prevent malfunctions and maintain good print quality, clean the rollers regularly (every 20,000 labels). TM-P60 with Peeler User’s Manual 13...
  • Page 14 Therefore, when a wider setting is used, part of the head may be worn out, which can cause poor printing. 14 TM-P60 with Peeler User’s Manual...

  • Page 15: Specifications

    AC adapter: Output voltage: DC 12 V EPSON PS-10 Input voltage: AC 100 V ~ 240 V (Model DA-42Y12) Product name: PS-10, Trade name: Seiko Epson Corporation LPS power supply Output voltage: DC 12V Output current: 0.06A ~ 3.5A Note: Should be a listed Class 2 power unit or LPS power supply.
  • Page 16 English Printed in China 16 TM-P60 with Peeler User’s Manual...

Table of Contents