Epson TM-P60 Technical Reference Manual page 43

Memory Switch
Select the "Memory Switch" tab. Press the "Get Status" button to retrieve and display the
current settings.
Memory Switch 8
SW Function
1 Status notification *1
2 Buzzer sound when battery is not charged Buzzer sounds *
3 Buzzer sound when printer and host device
are not connected
4 Buzzer sound when roll paper roll is out
5 Buzzer sound if an error occurs
6 ~ 8 Reserved
*: Default Setting
• Msw 8-1 : If On is selected, the printer sends power off notifications, power on notifications,
and battery status to the host PC. If Off is selected, the printer does not send these
notifications.
• Msw 8-2 : If On is selected, and the battery status is "Level L" or "Level S," the buzzer will
sound for 10 seconds.
• Msw 8-3, 8-4, 8-5 : If On is selected, the buzzer sounds in 10 seconds for these statuses. See
"3.1.1 Error Types" (page 3-1) " for further details regarding printer errors (Msw 8-5).
After setup, press the [Refresh Status] button to write the settings to the printer.
Rev. C
On
Transmits*
Buzzer sounds
Buzzer sounds *
Buzzer sounds *
-
TM-P60 Technical Reference Guide
Off
Does not transmit
Buzzer does not sound
Buzzer does not sound *
Buzzer does not sound
Buzzer does not sound
Fixed to Off*
Setup 2-19