2.3 Setup Flow
To get the best performance from your printer, you need to make appropriate settings based on
your environment.
The setup flow is as follows:
1. Printer setup
❏ Attach the feeder guide. (See Section "2.4.1, Attaching the
❏ Attach the pocket unit (only for the ASF model). (See Section
❏ Connect the power supply for the printer. (See Section "2.4.3,
❏ Install the ink cartridge. (See Section "2.4.4, Installing the Ink
❏ Install roll paper. (See Section "2.4.5, Installing Roll Paper,"
2. Connect the printer and host PC/POS terminal (See Section "2.5,
Connecting the Printer to the Host PC," (page 2-12).)
3. Install and set up drivers (See Section "2.6, Installing and Setting
Up the Drivers," (page 2-12).)
5. Complete setup.
Note:
Install the printer horizontally.
2-4 Setup
Feeder Guide," (page 2-5).)
"2.4.2, Attaching the Pocket Unit," (page 2-5).)
Connecting the Printer Power Supply," (page 2-7).)
Cartridge," (page 2-8).)
(page 2-10).)
4. Adjust various settings (if necessary). (See Section
"2.7, Adjusting Various Settings," (page 2-13).)
Rev. F