User List - Elster EK260 Operating Manual And Installation Instructions

WDy max Max. daily counter W in current month
By entering <ENTER> you can branch to the submenu where the time stamp of
the maximum is displayed.
The maxima of the last 15 months can be interrogated in monthly archive 1 ( →
3.6), if it has been appropriately parameterised.

3.14 User list

AD
VbT Vb total
VmT Vm total
p Pressure
T Temperature
K Inverted compressibility factor ratio
C Conversion factor
SReg Status register, total
VbMP Month's max. Vb
Date Date of month's max. Vb
Time Time of month's max. Vb
Qb Flow at base conditions
Qm Actual flow rate
Menu Selection for display menu
With exception of the last value, this list is application-specific, i.e. the user can himself set
which values in this list are displayed. Ex-works, these are the above-mentioned values
which are also all displayed in another list and described in the corresponding chapters.
Since the status register SReg in this list is not assigned to any submenu, it can be directly
cleared here in contrast to the status list ( → 3.7).
The setting of the values to be displayed occurs by using the parameterisation software
"WinPADS".
With Menu the complete display structure of the EK260 can be switched between
"complete" and "simple".
Menu =
1 Complete display structure
2 Only "User" column
3 Complete display structure without the "Energy" column
Menu = 1 corresponds to the standard setting which is described in this manual.
With the setting Menu = 2, the display is limited to the column "User" described here. All
other columns cannot be called.
Elster GmbH
Designation / value
Volume Conversion Device EK260
Unit Access Address DC
m3
m3
bar
°C
-
-
-
m3
-
-
m3/h
m3/h
-
(Legends: see page 22)
Meaning
- 2:302 15
- 4:302 15
- 7:310_1 4
- 6:310_1 4
- 8:310 4
- 5:310 4
S 1:101 19
- 3:161 16
- 3:165_1 16
- 3:165_2 16
- 2:310 4
- 4:310 4
L 1:1A1 7
87