Table of Contents
Advertisement
User keys, selection key and symbols
▷ You can navigate through the menu using the user
▷
keys
,
and the selection key
Symbol
Meaning
Navigate to the left or the right on each
,
level using the user keys.
Briefly pressing the selection key selects
a sub-menu.
Holding the selection key pressed down
switches the display back to the previ-
ous menu.
Briefly pressing the selection key selects
a sub-menu.
Holding the selection key pressed down
switches the display back to the previ-
ous menu.
Keys inactive
,
,
Valve/gas flow closed. This symbol is only
OFF
displayed when a valve is integrated in
the gas meter.
Valve/gas flow released. This symbol is
ON
only displayed when a valve is integrated
in the gas meter.
New messages
Invalid data
Alarm
Low battery. This symbol is only dis-
played when battery power is low.
▷ In each menu, the meaning of the symbols for the
▷
keys is described in the information area.
▷ In the basic display under "General instructions",
▷
all the symbols are explained.
Navigating within the menu
▷ The menu is constructed hierarchically.
▷
▷ Depending on the configuration, some menus
▷
may be missing.
▷ The "Current meter reading" basic display appears
▷
when switching on the index.
▷ If you are in a different menu, the display will
▷
automatically change back to the basic display
when no user key has been pressed for 30 s, and
switches off after a further 30 s.
▷ You can navigate from the basic display to the
▷
various menus, such as "Meter information" using
the user keys
,
.
.
Menu overview
–
Current meter reading
General instructions (x/y)
Meter information
–
Date and time: UTC
Past meter readings
–
Past meter readings (x/y)
Monthly summary
Weekly summary
Daily summary
–
Tariff totals
–
Text messages
Opening valve
Current meter reading
▷ The absolute meter reading and optionally the
▷
current tariff are indicated in the basic display.
▷ This display appears when switching on the index.
▷
▷ You can receive information about the symbols
▷
by pressing the selection key
keys
,
, or see [User keys, selection key
and symbols – p. 3].
Meter information
▷ Gas meter-specific technical data.
▷
Meter information
Version
Details
Volume
CRC
Standard :
– Version: software version,
– Details: software details,
– Volume: cyclic volume of the measuring cham-
ber,
– CRC: software checksum,
– Standard/Directive note.
▷ For further information, see [Technical data – p. 8].
▷
GB-3
4 hour summary
Single meter reading
and the user
:
:
:
dm
3
:
Advertisement
Table of Contents
