User Values For The Customer; User Values For The Administrator - Elster EK280 Applications Manual

EK280

2.1.3 User values for the customer

i
For parameterization of the EK280 you will require a connection cable for the optical interface as
well as the enSuite application, which can be downloaded for free at www.elster-instromet.com.
All values displayed on the "Cust." tab, can be set using enSuite:

Connect a PC or laptop with enSuite installed to the EK280 optical interface using the connection
cable.

Start enSuite and set up the communication link to the EK280. (see chapter 3.1 "Setting up the
communication link to the EK280 via optical interface", page 15)

Select "Navigation" on the left-hand side and then
navigation window.

In the top of the device window open the path "Parameters" >
clicking on the relevant plus signs, and then select

By using the "All Parameters" tab in the right-hand part of the window, you can now select which
values are to be displayed. To do this, press an entry in the "Value" column, and then the button with
the three dots. You can now select a new value to be displayed for this position in the display in the
window that opens up.

Once you have set all values, click on the "Transfer changes to device" icon at the top of the enSuite
window.

2.1.4 User Values for the Administrator

i
For parameterization of the EK280 you will require a connection cable for the optical interface as
well as the enSuite application, which can be downloaded for free at www.elster-instromet.com.
All values displayed on the "Admin." tab under

Connect a PC or laptop with enSuite installed to the EK280 optical interface using the connection
cable.

Start enSuite and set up the communication link to the EK280. (see chapter 3.1 "Setting up the
communication link to the EK280 via optical interface", page 15)

Select "Navigation" on the left-hand side and then
navigation window.

In the top of the device window open the path "Parameters" >
clicking on the relevant plus signs, and then select

By using the "All Parameters" tab in the right-hand part of the window, you can now select which
values are to be displayed. To do this, press an entry in the "Value" column, and then the button with
the three dots. You can now select a new value to be displayed for this position in the display in the
window that opens up.

With the first 10 values you select what will be displayed in the display of the unit under the tab
"Admin." under
content of display via the path

Once you have set all values, click on the "Transfer changes to device" icon at the top of the enSuite
window.
Application Manual
"User values". With the next 12 values you select what will be displayed as the
"User values" > "further...".
"Parameterize
"User column
"User values" can be set using enSuite:
"Parameterize
"User column
online" at the bottom of the
"Device settings" > "Display" by
'Customer'".
online" at the bottom of the
"Device settings" > "Display" by
'Administrator'".
7