Table of Contents
Advertisement
Temperature-Volume Corrector TC210
2.3 User interface structure
The user interface in the TC210 is structured as a list (main menu). From here at the ap-
propriate entry points it is possible to skip into the submenus Archive, Total status register,
System or Service.
2.3.1 Main menu (User list)
1
Values subdivided into two (e.g. pre- and post-decimal places). To display the second part of the value keep
the key pressed for at least two seconds. Press the key again to skip back to the display list.
2
User-specific values, i.e. the user can set which values are displayed.
3
The archive is assigned under "ARC1" (Explanation: see Chapter: 3.2).
4
Submenus are assigned under "U1" – "U3" (Explanation: see Chapter: 3.3).
16
User
Vb
Standard volume
VbT
Standard volume, total quantity
1
V
Actual volume
VT
Actual volume, total quantity
T
Temperature
1
TIME
Time and date
P.F
Pressure fixed value
K.F
Gas law deviation factor, fixed value
C
Conversion factor
2
TMIN
Lower temperature alarm limit
2
TMAX
Upper temperature alarm limit
2
EQIT
Coefficient 1 of temperature equation
2
EQ2T
Coefficient 2 of temperature equation
2
EQ3T
Coefficient 3 of temperature equation
ARCH
Archive
S.REG
Overall status register
SYS
System
SERV
Service
1
1
1
3
ARC1
4
U1
4
U2
4
U3
ELSTER Handel GmbH
Advertisement
Table of Contents
