Waveform Generator And Power Amplifier; Waveform Generator - Hantek DSO4072 User Manual

2.16 Waveform Generator and Power Amplifier

2.16.1 Waveform Generator

DSO4000 series oscilloscope is equipped with waveform generator function, with one channel of
arbitrary waveform output. User can edit the arbitrary waveform or choose the regular waveforms
such as Sine, Ramp, Square, Trapezia, DC, Exponent, AM/FM.
Push the GEN button to display the DDS Menu.
Generate the Sine waveform
To output a Sine Wave, please do the following steps:
1. Press F1 button to select "Sine".
2. Set the Wave Parameter:
Frequency: Set the output wave frequency.
Amplitude: Set the output wave amplitude.
Y Offset: Set the output wave vertical level offset.
Output: Select output type continuous or single.
Ext Trig: Turn on or turn off external trigger, select rise edge or falle dge.
Generate the Ramp waveform
To output a Ramp Wave, please do the following steps:
1. Press F2 button to select "Ramp".
2. Set the Wave Parameter:
Frequency: Set the output wave frequency.
Amplitude: Set the output wave amplitude.
Y Offset: Set the output wave vertical level offset.
Wave Param:
Duty: The duty of the output wave.
Output: Select output type continuous or single.
Ext Trig: Turn on or turn off waveform output, select rise edge or falle dge.
Generate the Square waveform
To output a Square Wave, please do the following Step:
1. Press F2 button to select "Square".
DSO4000 Series Digital Storage Oscilloscope
Basic Operation
47