Filter; Wave; Dds - Hantek DSO4072 User Manual

Recording replay: Replay the current recorded waveforms.
Page 1 of the waveform replay function menu:
Option
Function
Mode
Time interval
Start frame
End frame
Page 1/2
Page 2 of the waveform replay function menu:
Option
Current Frame
Operation
Page 2/2

2.13.10 Filter

Press "Utility->F6->F6" to page 3 of utility menu to select "Filter". Press "F3" button to select filter
type Low Pass, High Pass, Band Pass or Band Stop.

2.13.11 Wave

Press "Utility->F6->F6" to page 3 of utility menu to select "Wave".
Options Settings
CH1
Source
CH2
Flash
Media USB
Loacation 0~99
Page 2/2
Save
Recall
Operation
Delete
SD to USB

2.13.12 DDS

Press "Utility->F6->F6" to page 3 and select "Option->DDS" of utility menu to enable to waveform
generator function.
DSO4000 Series Digital Storage Oscilloscope
Setup Description
Play Set a replay function menu.
Repeat Repeatedly replay the recorded waveform.
Single Replay the recorded waveform in single run.
Set the time interval of the replayed frame to frame.
Set start frame of playing
Set end frame of playing
Skip to page 2 of play menu
Setup Description
Start Start to replay waveform
Stop Stop to reply waveform
Back to page 1 of the replay function menu.
Select a waveformsource to store.
Save the source waveform to flash.
Save the source waveform to USB device.
SD Save the source waveform to SD card.
Select stored location when save waveform to flash media.
Save the source waveform to the selected reference location.
Recall saved source waveform to the selected reference location.
Delete saved waveform.
Copy waveform files to USB device.
Comments
Basic Operation
43