Hantek DSO4072 User Manual page 39

MATH
RefA
Location
RefB
Save
Operation Recall
Close
Page 2/2
Flash
Media USB
SD
Back Return to main menu.
Options Settings
Setup
Local Memory
Storage
USB
Location 0 to 9
Save
Operation
Recall
Back Return to main menu.
Options Settings
CSV
CH1
Source
CH2
Save
Recall
Operation
Delete
Close
File List
Open
Back Return to main menu.
Options Settings
Default
DSO4000 Series Digital Storage Oscilloscope
Select the reference location to store or recall a waveform.
Save the source waveform to the selected reference location.
Recall saved source waveform to the selected reference location.
Close Ref channel.
Save the source waveform to flash.
Save the source waveform to USB device.
Save the source waveform to SD card.
Comments
Store the current setups to the USB disk or the memory of the
oscilloscope.
Specify the memory location in which to store the current
waveform settings or from which to recall the waveform settings.
Use the F2 or F3 button to select.
Complete the saving operation.
Recall the oscilloscope settings stored in the location selected in
the Setup field. Push the Default Setup button to initialize the
oscilloscope to a known setup.
Comments
Store the current setups to the USB disk or the memory of the
oscilloscope.
Save waveform data as .CSV file to external storage.
Recall the saved .CSV file.
Delete .CSV file
Close file list.
Open file list.
Push the Default softkey to initialize the oscilloscope to a known
setup. Please refer to
Comments
Default Setup.
Basic Operation
30