Horizontal System - Hantek DSO4072 User Manual

Trigger (OT)
Vertical System,
All Channels
The following settings do not change when you push the DEFAULT SETUP button.

Language Option

Saved Settings

Saved Reference Waveforms

Display Contrast

Calibration Data

2.6 Horizontal System

Use the horizontal controls to change the horizontal scale and position of waveforms. The
horizontal position readout shows the time represented by the center of the screen, using the
trigger time as zero. When you change the horizontal scale, the waveform will expand or contract
to the screen center. The readout near the upper right of the screen shows the current horizontal
position in second. W indicates 'Window Time Base'. The oscilloscope also has an arrow icon at
the top of the graticule to indicate the horizontal position.
DSO4000 Series Digital Storage Oscilloscope
Coupling
Level
CH2
Type
Slope
Mode
Coupling
Level
Source
Polarity
Mode
Time
Coupling
Bandwidth Limit
VOLTS/DIV
Probe
Voltage Probe Attenuation
Invert
Position
VOLTS/DIV
Basic Operation
DC
0.00v
Edge
Rising
Auto
DC
0.00v
CH1
Positive
Auto
20ns
DC
Unlimited
Coarse
Voltage
10X
Off
0.00div (0.00V)
1.00V
11