Display Scan Mode - Hantek DSO4072 User Manual

Single-window Mode
Dual-window Mode (Full Screen)
Location of expanded window data in memory
Notes:
1. For more information of the trigger holdoff, see
2. In single-window mode, press F0 to hide or show the menus on the right side. The
dual-window mode does not support the menu hiding function.

2.6.2 Display Scan mode

When the time base is set to be 80ms/div or more slowly and the trigger mode is set to "Auto", the
oscilloscope enters the scan mode. At this mode, waveform display is renewed from left to right. At
the mode, no waveform trigger or horizontal position control exist. The channel coupling should be
set as direct current when a low-frequency signal is observed at the scan mode.
DSO4000 Series Digital Storage Oscilloscope
Major Window
Minor Window
(Expanded Window)
Trigger Controls.
Basic Operation
14