Debug mode
4-4-1 Master Diagnostics
Master Status
The state of the PROFIBUS-DP Master can be monitored through the menu
item 'Online – Global State Field', or while in debug mode, by double-clicking
on the Master unit's icon, and selecting 'Global State Field' from the list
shown below, and clicking 'Display':
Please note that not all items from the Task State list are supported by the
C200HW-PRM21. Invalid data may be displayed in some of the views.
The 'Global Task State' window shows the status of the Master Unit and its
slaves. For a detailed explanation of the data shown, please refer to the Help
files of SyCon (Press F1).
'Online master main state' indicates the same as the upper 2 bits of status
word IR n+2, i.e.:
C0
= OPERATE
80
= CLEAR
40
= STOP
00
= OFFLINE
Section 4-4
47