Group Membership - Omron C200HW-PRM21 Operation Manuals

Operation

4-3-5 Group membership

Group Definitions
Group Assignment
Via the menu item 'Settings – Group membership', up to 8 groups of slaves
can be defined as targets for PROFIBUS-DP Global Control Commands.
The Group Membership dialog box allows definition of group names, and of
supported functions (Freeze / Sync) per group, For more information on the
execution of Freeze / Sync functions, see 5-3-1, Control words'.
Group names can be modified for easier identification. This has no effect on
the operation of the unit.
The 'Freeze' and 'Sync' check-boxes can be used to prevent assignment of
slaves which do not support these functions. Unchecking a function for a
specific group will not prevent the processing of the global control command
for that group.
The 'Group Assignment' button provides access to the 'Group Assignment'
dialog box, in which slaves can be assigned to the groups. Each slave may be
assigned to any number of groups. If a slave does not support SYNC and/or
FREEZE functions, assignment to a group with this function is not possible.
Section 4-3
39