Unless indicated otherwise, all shown examples assume that:
•
Machine No. switch of the C200HW-PRM21 is set to 0.
•
All unit settings are at the default value (0000).
•
Slaves are mapped into the unit's I/O buffers by auto-addressing (start at offset=0)
Therefore:
•
Unit settings area is DM1000-1017.
•
Command/status data are IR100-104.
•
Remote inputs are IR350-399.
•
Remote outputs are IR050-099.
•
Slave status area is IR200-215.
Appendix A
Tips and sample programs
93