Slave Diagnostics - Omron C200HW-PRM21 Operation Manuals

Debug mode

4-4-2 Slave Diagnostics

Slave Status
Slave Diagnostic
48
In debug mode, the bus configuration display shows a status overview of all
configured devices:
The station's status is indicated by the colour of connection to the main bus
line, and by the displayed image of the device.
Green Normal data exchange with this slave.
Red Slave has diagnostic information or the master couldn't find this
slave on the bus, i.e. there is no data exchange with this slave.
•
A thin, black connecting line (e.g. Slave 4) indicates that the slave is not
assigned to the selected master unit. The status of this slave cannot be
monitored.
•
A cross through the slave icon (e.g. Slave 3) indicates that the slave was
defined to be not active in the current configuration (See 4-3-4 Device
configuration).
A double click with the mouse on a slave device calls up more detailed
diagnostic information. Slave diagnostics are displayed as defined in the
PROFIBUS-DP standard EN 50170.
Diagnostic information in this window is not updated online. Close and reopen
the window to refresh the information.
For a detailed explanation of the displayed information, consult the online
Help system (press F1).
Section 4-4