Table 1.2: Type Code Description - Danfoss VLT FCD 302 Operating Instructions Manual

Introduction
1 1
Position Description
24 Sensor plugs
25 Motor plug
26 Mains plug
27 Fieldbus plug
28 Reserved
29-30 A option
31-32 B option
33-37 Reserved
38-39 D option
Table 1.2 Type Code Description
Not all choices/options are available for each FCD 302
variant. To verify if the appropriate version is available,
consult the Drive Configurator on the Internet at
Danfoss website /driveconfig.
NOTE
A and D options for FCD 302 are integrated into the
control card. Therefore pluggable options for frequency
converters cannot be used here. Future retrofit will require
exchange of the entire control card. B options are
pluggable, using the same concept as for frequency
converters.
8
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
®
VLT Decentral Drive FCD 302 Operating Instructions
Choices/options
X No sensor plugs
Direct mount 4xM12: 4
E
digital inputs
Direct mount 6xM12: 4
F digital inputs, 2 relay
outputs
X No motor plug
X No mains plug
X No fieldbus plug
E M12 Ethernet
P M12 Profibus
X For future use
AX No A option
A0 Profibus DP
AN Ethernet IP
AL ProfiNet
BX No B option
BR Encoder option
BU Resolver option
BZ Safety PLC Interface
XXXXX For future use
DX No D option
D0 24 V DC back-up input
MG04F302 - VLT
®
is a registered Danfoss trademark