Input To The Inverter From The Network - Mitsubishi Electric FR-E720-0.1K Instructions Manual

FUNCTIONS
5.2

Input to the Inverter from the Network

Main items which can be commanded from the network to the inverter and their descriptions are explained
below.
Item
Frequency setting Set the running frequency of the inverter.
Operation mode write Set the operation mode of the inverter.
Set the control input command such as forward operation
Run command
signal (STF) and reverse rotation signal (STR).
Inverter reset Reset the inverter.
Parameter write Set parameters of the inverter.
Parameter clear Return parameters to the initial values.
Input terminal function Use the function of the inverter input terminal.
REMARKS
Refer to the inverter manual for functions controllable from the network in each operation mode.
36
Description
Refer to page
PPO type PPO type
Support Non Support
Specifications Specifications
50 76
55 76
48 75
48, 56 74
46, 62 67, 78
55 74
51 75