Connecting To The Pc Database Software - Maico ERO-SCAN Operating Instructions Manual

Operating Instruction
ERO•SCAN
Screening and Diagnostic Version
Display 10

11.4 Connecting to the PC Database Software

Connection to the PC database software is achieved by using the provided Micro-USB to
USB-A cable or via Bluetooth
USB Connection:
Plug the correct end (USB-A) of the cable into an available USB port on the computer and
the correct end (Micro-USB) of the cable into the port found on the bottom of the
®
ERO•SCAN instrument.
®
The ERO•SCAN instrument will detect the connection to the PC and wait for an action or
communication from the PC database software.
Bluetooth ® Connection:
Refer to the ERO•SCAN
NOTE: See the ERO•SCAN
application.
operating_instructions_8106556-6_EROSCAN_e_15a
®
The ERO•SCAN
Display 10 while searching. When the printer is found, all the
test results that are stored in memory will print out
automatically.
The ERO•SCAN
complete.
NOTE: All printed test results are marked for deletion, but will
continue to be stored in memory until a new test is started at
which time all tests in the memory will be erased. This allows
the user to reprint the tests if printing is unsuccessful (for
example, the paper runs out before printing is complete).
NOTE: See the ERO•SCAN
instructions on printing from the Database Software.
® .
®
Database Software Manual for connection via Bluetooth
®
Database Software Manual for instructions on using the
®
will search for the paired printer showing
®
instrument will power off when printing is
®
Database Software Manual for
26
®
.
8106556-5 02/15