Operating_Instructions_8106556-6_Eroscan_E_15A I 8106556-5; Main Menu; Selecting The Test Protocol - Maico ERO-SCAN Operating Instructions Manual

Operating Instruction
ERO•SCAN
Screening and Diagnostic Version

10.4 Main Menu

Date & Time
Start Left
Ear Test
Change Protocol
and Settings

10.5 Selecting the Test Protocol

Display 2
operating_instructions_8106556-6_EROSCAN_e_15a
®
Display 1
The currently selected protocol is shown on the Main Menu
(Display 1). To change the selected protocol press CHANGE at
the Main Menu. The Change Protocol Display will appear
(Display 2). Use the CHANGE arrow buttons to change the
selected protocol. Press the UP arrow to return to the Main
Menu to begin testing. Press the SETUP to enter the setup
menus.
For either DPOAEs or TEOAEs screener devices, there are two
default test protocols that vary by averaging time.
contains complete information on protocol settings. For
instructions for customizing diagnostic protocols, review
chapter 18 and 19.
NOTE: Screener default protocols cannot be customized.
Diagnostic protocols are customizable.
Selected Protocol
Battery Status
Start Right
Ear Test
19
Appendix D
8106556-5 02/15