Getting Started; Pc System Requirements; Unpacking And Inspecting - Maico easyTymp Operating Manual

easyTymp® Operating Manual

3 Getting started

3.1 PC system requirements

Processor:
Memory:
Graphic display:
Operating system:
Connection:

3.2 Unpacking and inspecting

Check the packaging and content for damage
Thoroughly inspect the exterior of the shipping for any sign of damage or tempering. Should
any damage be noted, please notify the carrier immediately.
If the content box has been damaged during transportation, the instrument should be
checked for any electrical or mechanical defects. Should any defects be identified, please
contact the responsible dealer. Keep all original packaging to facilitate any insurance claims
against the damages.
Keep the original packaging for future shipment!
The easyTymp® is packaged in a specially-designed box. Please keep the box as it will be
useful for sending the instrument for the annual instrument check-up.
Please contact your nearest responsible dealer should the annual instrument check-up be
needed.
Please check that all accessories listed below are received in good condition. If any accessories
are missing or damaged, immediately notify your MAICO Special Instrument Distributor
Standard Accessories
Probe
Rechargeable Battery Pack
Software CD
easyTymp® handheld unit
Probe Tip
Eartip Kit
Instruction Manual
Calibration Cavity
Power Supply (Handheld Unit)**
Power Supply (Cradle)**
USB Cable for Handheld*
USB Cable for Cradle*
*Will contain only one, depending on configuration ordered.
** Will contain only one, depending on configuration ordered.
Intel Pentium 4 / Celeron 1,4 GHz
1 GB RAM
1024 x 768
Windows XP Professional (mit SP3)
Windows 7, Professional oder Ultimate Version für 32 und 64 Bit
Computer
USB 1.1 or higher
Part No
721-2
721-4
1156-2075
721-1
721-3
721-5
1162-1100
721-7
721-6
721-9
1025-2097
1025-2092
4