Operating Instruction
ERO•SCAN
Screening and Diagnostic Version
17 Instrument Settings
®
The ERO•SCAN
instrument allows the user to change many of the instrument's settings or
functions. These settings include Bluetooth
Shutdown Time, Minimum Amplitude Value, Save Mode, Clock Mode, Language, and Reset
to Default Settings.
To access the menus to change these functions, press CHANGE at the main menu
(Display 1, page 19) and then press SETUP at the Protocol Change (Display 2, page 19) to
enter the Clock menu (Display 13, page 37). At the Clock menu, hold down the CHANGE
key for 3 seconds until the 'READY' light (green LED) turns off and release the key.
17.1 Bluetooth
Display 16
Display 17
Display 18
operating_instructions_8106556-6_EROSCAN_e_15a
®
®
Device Pairing
The Bluetooth
pair the ERO•SCAN
thermal printer or personal computer, for printing test results
and data transfer.
The ERO•SCAN
time. To establish Bluetooth
will be paired with the ERO•SCAN
Then select DISCOVER to initiate discovery of available
Bluetooth
®
®
Bluetooth
time the user will see the message "Please Wait" on the
Display and the yellow 'TEST' LED will flash. Discovery can be
canceled by pressing the CANCEL button.
When discovery is complete, all discovered devices will be
shown in the order in which they were found (Display 17). A
compatible thermal printer will appear as "PRT-##-##" (e.g.:
PRT-54-81) and other devices will be shown by their name
which can vary depending on the device. Use the CHANGE
buttons to select the desired device and then use the PAIR
button to pair the ERO•SCAN
Pairing will be confirmed (Display 18). The pairing process is
complete. Select Main Menu to exit the Bluetooth
menu.
NOTE: See the
Bluetooth
®
displayed.
®
Device Pairing, Clearing Test Results, Auto
®
pairing menu (Display 16) allows the user to
®
unit with a Bluetooth
®
unit can be paired with only one device at any
®
pairing, turn on the device that
devices. The ERO•SCAN
devices for approximately 15 seconds. During this
®
to the selected device.
Troubleshooting
pairing is unsuccessful or if any error messages are
38
®
device, such as a
®
unit (e.g.: thermal printer).
®
will search for available
®
section on page 51 if
8106556-5 02/15
pairing