Warnings, Cautions, And Errors - Maico ERO-SCAN Operating Instructions Manual

Operating Instruction
ERO•SCAN
Screening and Diagnostic Version

3 Warnings, Cautions, and Errors

In this manual the following two labels identify potentially dangerous or destructive
conditions and procedures.
WARNING
CAUTION
NOTE: Notes help you identify areas of possible confusion and avoid potential problems
during system operation.
WARNING
operating_instructions_8106556-6_EROSCAN_e_15a
®
The WARNING label identifies conditions or practices that may
present danger to the patient and/or user.
The CAUTION label identifies conditions or practices that could
result in damage to the equipment
®
The ERO•SCAN Otoacoustic Emission Test System should be
charged using only the provided power supply. Injury to personnel
or damage to equipment can result when a three-prong to two-
prong adaptor is connected between the ERO•SCAN
and an AC outlet.
No modifications of the equipment are allowed by anyone other
than a qualified MAICO representative. Modification of the
equipment could be hazardous.
®
The ERO•SCAN product has been verified by an independent
laboratory to conform to international standards for EMC
(electromagnetic emissions and immunity). The user is advised to
avoid installation and use of this instrument in proximity with other
devices or equipment that may emit or be susceptible to
electromagnetic interference, including mobile phones. If the
instrument is used adjacent to other devices or equipment, the user
is instructed to verify that no disturbance is found in the operation
of this or other equipment in proximity.
This icon indicates that patient applied parts of the instrument
conform to IEC 60601-1:2005, Type B requirements.
3
®
power supply
8106556-5 02/15