Printer Highlights; Available Materials; Minimum Clearances - Stratasys Fortus 380mc Operation And Maintenance Manual

PRINTER HIGHLIGHTS

• Envelope Size:
380mc - 14 x 12 x 12 inch (355.6 x 304.8 x 304.8 mm)
450mc - 16 x 14 x 16 inch (406.4 x 355.6 x 406.4 mm)
• Material Canister Bays:
380mc - 1 model, 1 support
450mc - 2 model, 2 support
• Touchscreen Graphical User Interface

AVAILABLE MATERIALS

Three material options are available for the 450mc. Option details are as follows:
Option
Standard
Engineering
High Performance
In addition to the material bundles listed above, a stand-alone license can be purchased for any of these
materials.

MINIMUM CLEARANCES

Side Clearance
Rear Clearance
Front Clearance
Overhead Clearance
Option Details
ABS-M30 (all colors), ABS-M30i, ABS-ESD7, and ASA (all colors) model material with SR-
30 or SR-35 support material.
PC, PC-ABS, PC-ISO, and Nylon12 model material with associated PC_S, SR-100 and SR-
110 support materials.
ULTEM 9085 and ULTEM Black model material with associated Ultem support material
(ULT_S), Ultem 1010 model material with associated ULTEM 1010 support material
(U1010S1), ST130 model material with associated ST130-S support material, and Nylon12
CF model material with associated SR-110 support material.
Minimum 30 inches (76.20 cm) on each side
Minimum 12 inches (30.48 cm)
Minimum 36 inches (91.44 cm)
Minimum 24 inches (60.96 cm)
7