Setting Print Only - Keysight U1701B User's And Service Manual

Setting Print Only

If the remote interface of the meter is under print-only mode, the meter will print
out only the measured data when the measuring cycle is completed. The meter
will auto-send the latest data to a host continuously. The meter will not accept
any commands from the host when print-only is enabled. The remote indicator of
the meter will be flashed during operation as Print-only ON. To enable the
print-only, refer to
Figure 3-5
Keysight U1701B User's and Service Guide
Figure 3-5.
Print-only Setup
Default Setting Configurations 3
49